ArtBots 2008 was held on September 19-21 in the Science Gallery at the Trinity College in Dublin, Ireland. The show featured 15 works of art by 16 artists from 9 countries. Solarbotics Ltd was proud to provide several demo robots to the Science Gallery to use during ArtBots for their “hands-on” robot display. One of […]
The Solarbotics Marble Machine (Battery ...
Solar botics
May 15, 2015
We are happy to announce the arrival of the Battery Edition Marble Machine. Starting today it is available at our website for backorder, and will be fully available for purchase starting tomorrow May 16.
You are probably familiar with its older cousin, the Solar Marble Machine that has a clever circuit that delivers short bursts of energy collected by the solar cell to the gear wheel. And while the Solar Marble Machine runs on pure and natural solar energy and is a lot of fun of fun to watch, the Battery Version doesn't depend on the external lighting conditions and will faithfully deliver mesmerizing marble run action in complete darkness if necessary, with just a flip of a switch. On top of that, it is solder-free. In fact, it is so easy to assemble, your cat could build it.
The kit comes to you complete with all the components you need to build your own Marble Machine. The assembly is straightforward and well-documented, and you will only need a few hand tools (no hot melting solder spewing around, expensive tools or motor skills required). The wooden parts come in handy panels with additional instructions, and if you snap a piece during assembly, we'll send you out a replacement part (email sales@solarbotics.com for details). We also have spent a good chunk of engineering time improving the initial layout to make the machine's assembly and performance smoother.
So here you have - you can now populate your desk with a self-sufficient wooden distraction and watch the marbles roll down automagically.
Check out the Marble Machine in action:
We also created a handy assembly video for your cat to refer to:
MORE POSTS
Circuit: Herbie by Randy Sargent
Although not a true BEAM robot, this simple schematic by Randy Sargent is small, simple, slick, and effective. My own version uses a pair of pager motors and three cells from a 9V rechargeable battery. Hard to get any simpler than this device!
Sumovore Line-follower
This link is a bit on the old side, but if you are thinking of entering the WCRG event next month, here's last year's champion's (Craig Limber) webpage about turning his Sumovore into an almost-as-good line follower! It's a good way to get into this rapidly-growing event...
LMR Start Here Kit, Beetlebot Preorders
Good news! Despite a few small setbacks and stumbling blocks, we've survived both the office move and Maker Faire! (I was going to say that at least nothing burned down, but that isn't exactly the case...). But now that things are settling back to normal, we'll be doing our best to bring you more awesome […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.