Temporary Tattoos to Monitor Vitals An lighter more wearable alternative to FitBit (Via Beautiful Decay) Laser-Cut Wood Illustrations Layering laser-cut wood taken to a whole new level, by Martin Tomsky (Via Colossal) Tiny V8 Engine Out of Paper Paper can be exceptionally sturdy, especially when strengthened by glue. By Aliaksei Zholner (Via Gizmodo) REM Detection […]
The Solarbotics Comic Expos Best Project...
Solar botics
March 17, 2017
Solarbotics has been a regular at the Calgary Comic & Entertainment Expo for quite a few years now. Throughout the years we've shown off multiple projects that we created ourselves and in collaboration with some brilliant costume and prop designers. Here is a recap of the most impressive projects.
We are always happy to assist people doing something outstandingly elaborate, especially with the use of our parts. That is how we found out about the Iron Man by Phillip Vatour, which was featured at the Comic Expo 2016. It instantly became a center point for photo ops and tech related conversations.
Rainbow Brite was an ambitious and intensely prismatic cosplay build done by Lyn Janelle and Dan Damron of Solarbotics that probably can compare in brightness only to Angela Dale's Chameleon Cocktail Dress.
By far the largest project in scale was Shannon Chappell's Golem. Towering up more than 3.5 meters (12'), equipped with articulated weapons and glowing with repurposed LEDs it was an unbeatable showstopper. See more specs and details about it here.
Stay tuned for more info and insights from previous and upcoming Expos!
Weekend passes often sell out, so grab your TICKETS now, while you still can!
MORE POSTS
What's on the burner...
We're working on some new Arduino projects. It's fun working on open-source hardware. Both these projects are out for manufacture now, so hopefully it will only be a few weeks until they are ready. Project One: The GVS Shield We love Phidgets. They have all kinds of useful sensors, to which most subscribe to a […]
BIG Solar cars in Calgary tomorrow!
The America Solar Challenge finishes here in Calgary tomorrow (July 27) betweein 11 and 3:30pm! The teams are coming up over McKnight Blvd., which isn't far from our offices. We'll be out watching them go by for a few hours tomorrow, so if the phones don't get answered for a bit, you'll know why. Go […]
Wheee! They're here - the new RW2!
We've just got in our newly-machined RW2 hubs & tires - and they're better! Instead of the old 1/8" axle hole that didn't quite fit the GM11a-14a series correctly (they were too loose), these new ones fit perfectly with their 3mm hole!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.