Bad news, everyone - we don't have any new OR shiny things to show off today. That's because we've been busy packing up to attend the Calgary Comic Expo, which runs this weekend, from the 27th to the 29th. We have a booth set up and will be showing off some of our cool stuff, […]
The Solarbotics Comic Expos Best Project...
Solar botics
March 17, 2017
Solarbotics has been a regular at the Calgary Comic & Entertainment Expo for quite a few years now. Throughout the years we've shown off multiple projects that we created ourselves and in collaboration with some brilliant costume and prop designers. Here is a recap of the most impressive projects.
We are always happy to assist people doing something outstandingly elaborate, especially with the use of our parts. That is how we found out about the Iron Man by Phillip Vatour, which was featured at the Comic Expo 2016. It instantly became a center point for photo ops and tech related conversations.
Rainbow Brite was an ambitious and intensely prismatic cosplay build done by Lyn Janelle and Dan Damron of Solarbotics that probably can compare in brightness only to Angela Dale's Chameleon Cocktail Dress.
By far the largest project in scale was Shannon Chappell's Golem. Towering up more than 3.5 meters (12'), equipped with articulated weapons and glowing with repurposed LEDs it was an unbeatable showstopper. See more specs and details about it here.
Stay tuned for more info and insights from previous and upcoming Expos!
Weekend passes often sell out, so grab your TICKETS now, while you still can!
MORE POSTS
Golem at Calgary Comic Expo
Solarbotics has worked on a good many interesting costuming projects, but few have been as unique as Shannon Chappell's Rock Golem. Shannon did a fabulous job repurposing electronics for the Golem, and if you're trying to do the same, be ready for some major dumpster-diving. Alternately, since we first worked on the Golem, we've been […]
New Product: Prototyping & Enclosur...
Mega Protoshield for Arduino $20.75 The Arduino Mega has LOTS of I/O. This Mega Protoshield by Adafruit breaks it all out for easy access and prototyping. Single Panel Breadboard with Terminals $13.00 830 contact single panel breadboard with 3 banana terminal jacks. Acrylic Enclosure for the 1018 Interface Kit 8/8/8 $11.50 The 3804 Enclosure is […]
New Wheels
Remember those bad-boy wheels you saw on Strongbad? Well, they're now available! But be warned - we don't have the sleeve to fix the 2mm shaft to 1/8" hole diameter gap, so you'll have to improvise something yourself. Otherwise, your robot will have a bit of a lope to its roll!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.