So... We've finally decided to go all-out and bring over all the inventory from HVW Tech and integrate it into Solarbotics. This is a pretty big undertaking, and as such you're going to need to tip toe around the construction tape and sawdust while we re-arrange everything. How will this effect you? First off, we're […]
The Solarbotics Comic Expos Best Project...
Solar botics
March 17, 2017
Solarbotics has been a regular at the Calgary Comic & Entertainment Expo for quite a few years now. Throughout the years we've shown off multiple projects that we created ourselves and in collaboration with some brilliant costume and prop designers. Here is a recap of the most impressive projects.
We are always happy to assist people doing something outstandingly elaborate, especially with the use of our parts. That is how we found out about the Iron Man by Phillip Vatour, which was featured at the Comic Expo 2016. It instantly became a center point for photo ops and tech related conversations.
Rainbow Brite was an ambitious and intensely prismatic cosplay build done by Lyn Janelle and Dan Damron of Solarbotics that probably can compare in brightness only to Angela Dale's Chameleon Cocktail Dress.
By far the largest project in scale was Shannon Chappell's Golem. Towering up more than 3.5 meters (12'), equipped with articulated weapons and glowing with repurposed LEDs it was an unbeatable showstopper. See more specs and details about it here.
Stay tuned for more info and insights from previous and upcoming Expos!
Weekend passes often sell out, so grab your TICKETS now, while you still can!
MORE POSTS
Ringo - the great-grandson to the Photop...
We were pleased to see the Kickstarter for Ringo, the Photopopper-ish but much smarter version of our own ~17 year old design robot kit. The video showcases some pretty cool behaviors, and is easily one of those projects where we think "Jee, why didn't we do that?"
ScoutWalker III - limited stock!
We've managed to dig up enough parts to get six ScoutWalker III's together in time for Christmas. We'll have them ready by the end of the week for shipping, so if you don't mind waiting for your order to go until then, feel free to pre-order now!
Project: Experiments in Watermelon Filam...
It takes a while to get to know all the quirks of your 3D printer and filament well. We thought we'd add to the knowledge base and share what we've learned about using the eSun 1.75mm PLA filament in Glass Watermelon Red on our Kossel Pro delta style 3D printer.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.