Ok, switches everywhere! Most importantly, switching from Friday to Saturday is scheduled exactly at 12.00pm tonight, hopefully it happens on time. Because it was a long five days, and another seven before that, and then another seven. Should I continue? I think we all deserve a little bit of time titled Saturday and Sunday. Also, […]
The Solarbotics Comic Expos Best Project...
Solar botics
March 17, 2017
Solarbotics has been a regular at the Calgary Comic & Entertainment Expo for quite a few years now. Throughout the years we've shown off multiple projects that we created ourselves and in collaboration with some brilliant costume and prop designers. Here is a recap of the most impressive projects.
We are always happy to assist people doing something outstandingly elaborate, especially with the use of our parts. That is how we found out about the Iron Man by Phillip Vatour, which was featured at the Comic Expo 2016. It instantly became a center point for photo ops and tech related conversations.
Rainbow Brite was an ambitious and intensely prismatic cosplay build done by Lyn Janelle and Dan Damron of Solarbotics that probably can compare in brightness only to Angela Dale's Chameleon Cocktail Dress.
By far the largest project in scale was Shannon Chappell's Golem. Towering up more than 3.5 meters (12'), equipped with articulated weapons and glowing with repurposed LEDs it was an unbeatable showstopper. See more specs and details about it here.
Stay tuned for more info and insights from previous and upcoming Expos!
Weekend passes often sell out, so grab your TICKETS now, while you still can!
MORE POSTS
Project Monday: All-Seeing Eye
This week's project is coming to you fresh from Alex, an engineer in our R&D department, with some help from Yana, our graphic designer. They've developed an enclosure based on the SAFE that accommodates sensor mounts on each side in addition to an Arduino-style board within. And after putting on some short range and long […]
Solarbotics Raspberry Pi 3 SAFE Assembly...
The instructions for assembling the Pi v3 and the previous acrylic Pi SAFE are quite similar. The only difference between the models is the location of the LED light pipes, so these Pi3 instructions apply generally to all Pi SAFE versions. 1. Your Parts! 8 x 4-40 nuts 8 x 4-40 x 3/8" bolts 2 […]
Fireflies, Bundles, and Motors
Technically, winter starts with the Winter Solstice that occurs on December 21st. But we're pretty sure that whoever decided that is wrong, because it's starting to feel pretty darn cold out there. And to keep things warm, what do you need? Movement. And how do you make movement? Motors. So today we have range of […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.