The Solar Marble Machine

Solar botics
May 17, 2014

... is here! Check it out in all it's glorious wooden-ness (Russian birch-ness even!):

Starting today the Marble Machine is available at our website for backorder, and fully available for purchase starting May 18. The Solar Marble Machine is a result of collaboration of Solarbotics with MSRaynsford, whose original design was reworked as a solar-powered version. Check out the video here.

The kit comes to you complete with all the components you need to build your own Marble Machine. The assembly is straightforward and well-documented, and you will only need a few hand tools. The wooden parts come in handy panels with additional instructions, and if you snap a piece during assembly, we'll send you out a replacement part (email sales@solarbotics.com for details).

Populate your desk with a self-sufficient wooden distraction and watch the marbles roll down automagically.

MORE POSTS

September 13, 2005
SCC3733 Solarcell hacking

Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current: After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate […]

July 12, 2007
BEP Application: Wilf Rigter Solar Power...

The following instructions detail how to build a Solar Power Smart Head version 3. The Head will seek light and when it finds the brightest source it will go into a low current standby mode. This version also comes with an low power FLED circuit to indicate when the head is active.

January 7, 2005
CES - Engadget's video of the RS2 &...

Engadget has a large (albeit short) video of the new RoboSapien V2, and a bit of the Robopet. Check it out!

January 14, 2002
BEP Documentation Update

We've tweaked the documentation for the BEP-MSE1 "Miller Solarengine" to correct a minor error (if you wanted to use the MVSE modification, this is the correct on), and added some circuit specs. Application notes for all the modules are in the works- stay tuned!

1 69 70 71 72 73 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart