The Solar Marble Machine

Solar botics
May 17, 2014

... is here! Check it out in all it's glorious wooden-ness (Russian birch-ness even!):

Starting today the Marble Machine is available at our website for backorder, and fully available for purchase starting May 18. The Solar Marble Machine is a result of collaboration of Solarbotics with MSRaynsford, whose original design was reworked as a solar-powered version. Check out the video here.

The kit comes to you complete with all the components you need to build your own Marble Machine. The assembly is straightforward and well-documented, and you will only need a few hand tools. The wooden parts come in handy panels with additional instructions, and if you snap a piece during assembly, we'll send you out a replacement part (email sales@solarbotics.com for details).

Populate your desk with a self-sufficient wooden distraction and watch the marbles roll down automagically.

MORE POSTS

December 22, 2007
Well, that was a busy December...

Hi all. The staff at Solarbotics/HVW Technologies has been worked hard these last six weeks leading up to the winter holiday, so we'll be open again December 27/28, and again for regular hours January 2nd. Hope the holidays are good to you too! Regards, Dave Hrynkiw President, HVW Technologies/Solarbotics Ltd.

February 2, 2009
Red Lanterns Back in Stock

For all of you holding out to get your Valentine's Day Lantern in red, the wait is over! It's now back in stock and ready to order. You can get your HexPummer Lantern right here.

July 12, 2007
BEP Application: Servocore Walker

BEP02-Complete-120_2035.jpg
The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.

February 18, 2011
Netduino!

Not just another *uino clone, as this uses a 32-bit Atmel AT91SAM7X ARM microcontroller. Sure, it uses the same form factor (well, except for the breadboard-friendly mini version), but the Netduino uses the .NET micro framework. What's that mean? Well, you're using a hugely more capable microcontroller (8-bit vs 32 bit), with much more memory […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart