Ok, yes, we know. This is yet another late cool link post, but... We have a good excuse, honest! We just got in a second laser (from Full Spectrum), and we were distracted for most of yesterday getting it up and running. So enough excuses - here's this week's batch of links: PVC Instrument, DRS […]
The Many Faces of SAFE
Dave Hrynkiw
October 20, 2011
The SAFE (Solarbotics Arduino Freeduino Enclosure) is a marvelous contraption of laser-cut acrylic that makes a complete enclosure for your Arduino project. It gives you a protective shell with enough room for a basic shield, with knock-outs for power and USB connection. It even has a power switch.
The big problem with Arduinos and Freeduinos, however, is that there are different versions. You could even go so far as to say that there are many versions of them. And on top of the standard design/layout, there are boards like the Netduino/+, W&L Video Game Shield, Gameduino... And then there are other non Arduino devices, like the EZ-B and the PICAxe AXE401.
So make sure that the SAFE is compatible with your DIY poison of choice, we're releasing a fistful of special face plates so that you can accommodate your favourite board. All our SAFEs and faceplates are available in Black, Clear, Dark Red and Transparent Bloooo (it's so cool, you have to say it that way). Here's our entire list of plates:
- Netduino S.A.F.E. Faceplate
- Netduino Plus S.A.F.E. Faceplate
- Wayne & Layne Video Game Shield S.A.F.E. Faceplate
- EZ-B S.A.F.E. Faceplate
- PICAxe AXE401 S.A.F.E. Faceplate
- Gameduino S.A.F.E. Faceplate
So go forth, friends, and apply your favourite face to the SAFE. But not your actual face. That'd be pretty awkward. And creepy. On second thought, that'd make a wicked Halloween costume. Go, do it. Just send us some pictures.
MORE POSTS
Solarbotics at the MAKE Faire
Sooo, if you're not familiar with Make Magazine, you should be! An excellent quarterly "bookzine" from O'Reilly publishing - them guys that do the computer books with the ink-line drawings of animals on the cover. I'll be down there this April 22-23, giving BEAM lectures / workshops at their MAKE Faire in San Francisco, and […]
Friday New Product: PCBGrip
PCBGrip Cylinder Accessory (4 pack) $7.20 This accessory is great for adding standoffs and rotating elements to your PCBGrip (or Openbeam!). PCBGrip Tri Nut Accessory (pairs) $5.52 Inserting and aligning nuts into Openbeam can be a bit tricky, but this clever, simple tri-nut insert is a simple, effective solution to the problem. T-Bolt Accessory (pairs) […]
University BEAM Projects
The University of of Illinois at Urbana-Champaign has been running a BEAM-style mechatronics program (GE100) for the last few years. The purpose of the class is to build a self-powered device that can propel itself over both smooth and rough terrain, using a pair of servos and a BEAM-style servo-controller circuit (similar in function to […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.