Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current: After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate […]
Survey! Prizes!
Dave Hrynkiw
May 18, 2005
| We have developed a quick little survey to help us find out a few things from our visitors, and we hope you won't mind giving us your thoughts. In exchange for a little bit of your time, we will be entering your name into a draw for our newest product up on deck -- the Turbot! You can fill out the survey here. |  |
MORE POSTS
BEP Application: Pummer
The following instructions detail how to build a simple pummer using a BC2 (Bicore) BEP (Bicore Experimenter PCB). A pummer is a solar powered self activating LED flasher. The difference between a pummer and a BLFNAR (blinky light for no apparent reason) is that a pummer has a soft turn off, which means that it turns on fast, but slowly fades away.
Site Down for Maintenance March 10
Our website will be down for server maintenance on Sunday March 10th, 2013 between 1.30am to 11.30am MST (3:30 and 7:00 am EDT). We apologize for the inconvenience.
LightStorm Circuit
Check out our circuits page for another neat one gleaned from our design notebooks. A dark-activated, chaotically activating, dual pummer. Ideal for lighting up...things!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.