Monday is Heritage Day here in Alberta, Canada, so we will all be out Heritage-ing it up, and enjoying our all too short summer. So if you want to go all Heritage on BEAM, and buy a SolarRoller kit, we'll ship it to you when we are back in the office Tuesday!
Sumovore Brainboard - the PICAXE!
Dave Hrynkiw
November 5, 2008
It's been a bit long in the coming, but it's finally here: The Sumovore PICAXE Brainboard for the Solarbotics Sumovore!
One of the biggest tripping points we see from going from the pure digital/analog realm of BEAM to microcontrollers is learning the ins-and-outs of microcontrollers. The PICAXE nicely fills this void by offering a programming interface that is ...just a flowchart! Draw your logic diagram, hit program, and you're off and running!
We initially designed the PICAXE Brainboard to support both the 18X and 28X1 chips, but we've decided to simply package the kit with the PICAXE-28X1, which is a $10.50 chip itself. The 28X1 has enough I/O to support all the sensors (the 18X only supports 3 edge sensors), plus it has more memory and support for I2C (handy with several I2C-It sensors).
Here are the specifics:
- Support for the PICAXE-18X, 28X/28X1 microcontrollers
- Easy PICAXE 1/8” jack programmer interface
- 5 indicator LEDs
- Official PICAXE PWM Interface IC to drive motors
- Microprocessor reset switch
- Standard 0.1” expansion interface holes for breadboard add-ons
- Spot for optional resonator for more accurate timing
It's another convenient way to expand the capabilities of your Sumovore!
MORE POSTS
Make:KW, New Catalogue
Well folks, it's that magical time where we give you some special insight into what's new n' happenin' in the world of Solarbotics. We'll start off by sending our congrats to everyone who participated in the recent Make:KW Arduino 201 meetup. We were proud to sponsor the event by donating some L298 Compact Motor Driver […]
New SCC3733a-MSE Solarcell
What's so special about the new SCC3733a-MSE? Two things: It's machine-assembled with new high-quality Russian solar cells (the best commercial cells we've tested yet) It comes with a Miller Solarengine circuit pre-etched on the rear of the solarcell! We have only a limited number of these cells presently, so if you're looking for the absolutely […]
New TINY Pogo Pin Probes
We had some requests for some really, really small Pogo Push Pin Probes (Hmmm...shoulda named them PPPPs...). Anyway, here's the PP8s and the PPH2, which are the "short" version of the PP8 and the necessary holder to mount them. If you have really tight spaces you need to test, these are the probes you'll need!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.