Yet another selection of hand-picked links from all over the interwebs: Visualizing Ballet .. using Lilypad Arduino. Looks beautiful, produces drawing-like results and helps dancers to trace their movements for necessary feedback. (Via Arduino blog) Tiny CNC-bot Beautiful little Piccolo, in it's second incarnation (first one was all clear acrylic). 3D printed Katana Case Is […]
Sumovore Brainboard - the PICAXE!
Dave Hrynkiw
November 5, 2008
It's been a bit long in the coming, but it's finally here: The Sumovore PICAXE Brainboard for the Solarbotics Sumovore!
One of the biggest tripping points we see from going from the pure digital/analog realm of BEAM to microcontrollers is learning the ins-and-outs of microcontrollers. The PICAXE nicely fills this void by offering a programming interface that is ...just a flowchart! Draw your logic diagram, hit program, and you're off and running!
We initially designed the PICAXE Brainboard to support both the 18X and 28X1 chips, but we've decided to simply package the kit with the PICAXE-28X1, which is a $10.50 chip itself. The 28X1 has enough I/O to support all the sensors (the 18X only supports 3 edge sensors), plus it has more memory and support for I2C (handy with several I2C-It sensors).
Here are the specifics:
- Support for the PICAXE-18X, 28X/28X1 microcontrollers
- Easy PICAXE 1/8” jack programmer interface
- 5 indicator LEDs
- Official PICAXE PWM Interface IC to drive motors
- Microprocessor reset switch
- Standard 0.1” expansion interface holes for breadboard add-ons
- Spot for optional resonator for more accurate timing
It's another convenient way to expand the capabilities of your Sumovore!
MORE POSTS
YouTube-tastic
Well folks, we don't have any new products to show off today (I guess we're all too busy watching the Olympics...), but we DO have a small handful of recently uploadedYouTube videos to show off. Dave has been sifting through some of our old archive tapes, and pulled out a few gems, like this footage […]
BEP Documentation Correction...
Just a quick note for those of you who have been trying to build the SC1 Servocores with the 0.01uF capacitors as listed in the parts list. That's an error! 0.1uF is just fine. Documentation has been revised accordingly. Sorry for the error!
New Kits: The Spazovore and the SunSwing...
Yup, we've got a few new kits ready, the Spazovore beginner's kit, and the SunSwinger Pendulum kit. We're pretty happy with both of these kits, so scroll down a bit, and read about them below!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.