Brainwave Pro 3-Axis CNC controller For Kossel $185.83 The Kossel Pro uses the Z-Designs Brainwave Pro controller, which is the product of a close collaboration between Terence Tam and Mike Ziomkowski, based upon Matthew Wilson's original Brainwave low cost 3D Printer controller. Kossel Ball Joint Set Kit $78.00 These are not repurposed RC Car ball […]
Sumovore Brainboard - the PICAXE!
Dave Hrynkiw
November 5, 2008
It's been a bit long in the coming, but it's finally here: The Sumovore PICAXE Brainboard for the Solarbotics Sumovore!
One of the biggest tripping points we see from going from the pure digital/analog realm of BEAM to microcontrollers is learning the ins-and-outs of microcontrollers. The PICAXE nicely fills this void by offering a programming interface that is ...just a flowchart! Draw your logic diagram, hit program, and you're off and running!
We initially designed the PICAXE Brainboard to support both the 18X and 28X1 chips, but we've decided to simply package the kit with the PICAXE-28X1, which is a $10.50 chip itself. The 28X1 has enough I/O to support all the sensors (the 18X only supports 3 edge sensors), plus it has more memory and support for I2C (handy with several I2C-It sensors).
Here are the specifics:
- Support for the PICAXE-18X, 28X/28X1 microcontrollers
- Easy PICAXE 1/8” jack programmer interface
- 5 indicator LEDs
- Official PICAXE PWM Interface IC to drive motors
- Microprocessor reset switch
- Standard 0.1” expansion interface holes for breadboard add-ons
- Spot for optional resonator for more accurate timing
It's another convenient way to expand the capabilities of your Sumovore!
MORE POSTS
We're CLOSED for Maker Faire
Yeah, we warned you. We're not even in our office to write out this newspost. Nay, this is one of them fancy pre-recorded messages. It may or may not self destruct. So, yes, we're closed from May 19th (Thursday) to the 24th (Tuesday). We'll resume filling/shipping orders and replying to any correspondance once we're back […]
Scribbler S2 in stock
Parallax is already sold out of the successor to the Scribbler. We have some still!
Solarbotics Antweight
Adam Conus sent us a nice little message about his antweight combat robot The Fly.: Western Allied Robotics is kicking off another year of antweight combat events and I need new motors. (Because I'm very, very hard on them!) Still, they're cheap and light. Check out- http://home.comcast.net/~conusa/adam.htm to see the robot complete with solarbotics sticker!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.