Well, we've found the ringleaders in this little impromptu telecommunications insurrection and took them out back, where we switched from our standard 'beat with a metaphorical hammer' to 'beat with an real hammer'. Which worked so well, actually, that our phones are now back up and behaving themselves. We can now take calls without any […]
Sumovore Brainboard - the PICAXE!
Dave Hrynkiw
November 5, 2008
It's been a bit long in the coming, but it's finally here: The Sumovore PICAXE Brainboard for the Solarbotics Sumovore!
One of the biggest tripping points we see from going from the pure digital/analog realm of BEAM to microcontrollers is learning the ins-and-outs of microcontrollers. The PICAXE nicely fills this void by offering a programming interface that is ...just a flowchart! Draw your logic diagram, hit program, and you're off and running!
We initially designed the PICAXE Brainboard to support both the 18X and 28X1 chips, but we've decided to simply package the kit with the PICAXE-28X1, which is a $10.50 chip itself. The 28X1 has enough I/O to support all the sensors (the 18X only supports 3 edge sensors), plus it has more memory and support for I2C (handy with several I2C-It sensors).
Here are the specifics:
- Support for the PICAXE-18X, 28X/28X1 microcontrollers
- Easy PICAXE 1/8” jack programmer interface
- 5 indicator LEDs
- Official PICAXE PWM Interface IC to drive motors
- Microprocessor reset switch
- Standard 0.1” expansion interface holes for breadboard add-ons
- Spot for optional resonator for more accurate timing
It's another convenient way to expand the capabilities of your Sumovore!
MORE POSTS
Monday New Product: Filament & Tiny...
#4-40x1/2in Yellow Zinc Standoff, M/M, 1/4in threaded ends $0.50 #4-40 x 1/2" yellow zinc coated (chromate) steel standoff. IR Reflector sensor with leads $1.00 Reflective optical sensor with transistor output. 44mm Piezo Speaker $2.25 For making a LOUD beep, this piezo suits your need. Comes mounted in a plastic case with mounting tabs. Maxell LR44 […]
Closed for St. X-Men Day
Solarbotics will be closed between 11:00 AM and 3:30 PM MST on Friday, May 26th to celebrate the III some-what annual St. X-Men Day. We will respond to calls as soon as we get back.
Interesting Mini-sumo build
This mini-sumo design by Jeremy Bloyd-Peshkin features our wheels, and one of our favourite building materials, Sintra. We can't laser-cut sintra (PVC=bad stuff when burned), but milling it works well, as this builder shows. The asymmetric motor layout works, as proven by this contest-winning design (scroll to the bottom of the page).
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.