Sumovore Brainboard - the PICAXE!

Dave Hrynkiw
November 5, 2008

Sumovore PICAXE BrainboardIt's been a bit long in the coming, but it's finally here: The Sumovore PICAXE Brainboard for the Solarbotics Sumovore!

One of the biggest tripping points we see from going from the pure digital/analog  realm of BEAM to microcontrollers is learning the ins-and-outs of microcontrollers. The PICAXE nicely fills this void by offering a programming interface that is ...just a flowchart! Draw your logic diagram, hit program, and you're off and running!

We initially designed the PICAXE Brainboard to support both the 18X and 28X1 chips, but we've decided to simply package the kit with the PICAXE-28X1, which is a $10.50 chip itself. The 28X1 has enough I/O to support all the sensors (the 18X only supports 3 edge sensors), plus it has more memory and support for I2C (handy with several I2C-It sensors).

Here are the specifics:

  • Support for the PICAXE-18X, 28X/28X1 microcontrollers
  • Easy PICAXE 1/8” jack programmer interface
  • 5 indicator LEDs
  • Official PICAXE PWM Interface IC to drive motors
  • Microprocessor reset switch
  • Standard 0.1” expansion interface holes for breadboard add-ons
  • Spot for optional resonator for more accurate timing

It's another convenient way to expand the capabilities of your Sumovore!

MORE POSTS

March 15, 2011
Zendulums for Japan

Effective immediately, all the proceeds from the sale of Zendulum kits will be going to the Red Cross efforts in Japan. We'll change up the Zendulum laser artwork to note it as such shortly, and post the new pic. (Done!) Fractured Hinomaru inspired by James White's "Help Japan" poster.

April 27, 2005
New Solarcell, the SCC2433a

In our continuing quest to find the successor to the Sunceram throne, we invite you to welcome the SCC2433a solarcell! It's the little brother to the SCC3733, with similar polycrystalline & epoxy construction. It's quite the power-house in direct sunlight, but be warned - the cell arrangment is skewed in favour of current generation, not […]

July 6, 2017
Freezer Burn 2017 Pendant

Freezer Burn is an Alberta Regional Burning Man celebration annually creating a temporary community out on the prairie. A few of us here at Solarbotics attend, and having access to all of the neat technology, we make an effort to bring special projects to the festival. Lit up projects work well since the event is outdoors […]

October 14, 2009
Calgary ProtoSpace Open House

Calgary's fledgling hacking group is hosting an open-house at the ProtoSpace on October 27 November 3rd. We're planning to be there - come on down!

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart