Sumovore Brainboard - the PICAXE!

Dave Hrynkiw
November 5, 2008

Sumovore PICAXE BrainboardIt's been a bit long in the coming, but it's finally here: The Sumovore PICAXE Brainboard for the Solarbotics Sumovore!

One of the biggest tripping points we see from going from the pure digital/analog  realm of BEAM to microcontrollers is learning the ins-and-outs of microcontrollers. The PICAXE nicely fills this void by offering a programming interface that is ...just a flowchart! Draw your logic diagram, hit program, and you're off and running!

We initially designed the PICAXE Brainboard to support both the 18X and 28X1 chips, but we've decided to simply package the kit with the PICAXE-28X1, which is a $10.50 chip itself. The 28X1 has enough I/O to support all the sensors (the 18X only supports 3 edge sensors), plus it has more memory and support for I2C (handy with several I2C-It sensors).

Here are the specifics:

  • Support for the PICAXE-18X, 28X/28X1 microcontrollers
  • Easy PICAXE 1/8” jack programmer interface
  • 5 indicator LEDs
  • Official PICAXE PWM Interface IC to drive motors
  • Microprocessor reset switch
  • Standard 0.1” expansion interface holes for breadboard add-ons
  • Spot for optional resonator for more accurate timing

It's another convenient way to expand the capabilities of your Sumovore!

MORE POSTS

April 24, 2015
Friday New Product: Grove and More

Time for a big product update! Again, we're thrilled with the Grove line of microcontroller-interconnected thingies, so heres a few more Grove-compatibles, SD cards, and a lonesome piezo speaker:

April 16, 2019
CLOSED April 19, for Good Friday
December 9, 2003
Kyle on Discovery TV

Kyle Simmons has been very busy lately, particularly being on TV! If you're getting the Canadian Discovery Channel, check him out tonight on 'Daily Planet' (22 minutes into the program). Hmmm.... nice kits you're featuring there! For those of you who missed it, EXN.CA has the clip online! Read More...

May 20, 2010
Maker Faire, Closed Mon. May 24th

Hey look, we're at Maker Faire! Hey look, we're at the Solarbotics Office! ... Hey look, we're like an  amoeba, splitting in half to be in two places at once. Ok, here's the skinny -  Right now, most of our staff is US-bound to attend the previously mentioned MakerFaire in the San Mateo/Bay Area in […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart