Strange set of Atmel '328 ICs...

Dave Hrynkiw
August 26, 2010

Unlike Sparkfun, who actually manage to find fake Atmel ICs, we just get strange batches.

The Atmel ATMega328 is the power behind the Arduino/Freeduino/*duino, and we have to set up a programming system to burn the venerable Arduino Bootloader into these chips.

We normally use an AVR STK500 in HVSP (high voltage serial programming) mode, as that lets us be absolutely sure the fuses are set correctly and the burn is correct. Interestingly enough, this last batch of chips refused to work with our batch files. Asking the chip's ID often returned 0x01 0x03 0X05 instead of the expected signature.

After spending a day checking to see if the programmer was broken (nope) or if the chips were fake (nope, we think), we did find that they did respond to regular old ICSP (in-circuit serial programming), but only partially.

Digging around, we found some older ATMega328 chips that worked fine, and compared them to this new batch. This troublesome batch has a date code of 1015 (15th week of 2010), and a batch code on the bottom as 9J4302 / 35473d / 1-P1015 e3.

So we re-wrote our batch file burning code to use AVRDude instead of the STK500 command-programmer, and to run it in ICSP mode on the STK500. The key addition is the "-B" part, which slows down the communication a bit. You want it as low as possible for fastest burn times. I tried a "-B 2" on both fuse & programming lines, but that really slowed the process. What's below is what we settled on.

: Set fuse bits, lock bits, voltages
.avrdude -c stk500v2 -i 20 -p m328p -P COM1 -b 115200 -B 1.8 -e -u -U lock:w:0x3f:m -U efuse:w:0x05:m -U hfuse:w:0xDA:m -U lfuse:w:0xFF:m
: Burn & Lock Arduino hex bootloader file
.avrdude -c stk500v2 -p m328p -P COM1 -b 115200 -B 1.1 -U flash:w:%HEXFILE% -U lock:w:0x0f:m

Hope that'll save anybody else from blowing better part of a day figuring out why their Atmel isn't programming normally!

MORE POSTS

July 2, 2007
"We are go-ing on a sum-mer holiday...

Hi all. Solarbotics & HVWTech will be closed for July 2, in lieu of our Canadian July 1st holiday. See you Tuesday!

September 22, 2007
PhotoPopper 5.0 Review

Darn! Why is it that everybody else has time to get video of these robots online but me?!? Oh well - at least it comes with a real nice review!

January 13, 2011
SparkFun Free-Day Aftermath

After last year's meltdown of servers during SparkFun's 1st "Free Day", we sent them flowers of condolence. This year, after seeing that little image of a burning computer on their error webpage , we felt he urgent need to send down the entire Canadian fire brigade (yup, both extinguishers). And who better to put out […]

March 5, 2003
BEP Requests?

We've been kicking around what to do as our next Bicore Experimenter's PCB Application note. As we're deadlocked on several ideas, we thought it'd be worthwhile to open it up to you. What sort of new BEP application would you like to see us produce next? Let us know by clicking on the "Posted By:" […]

1 5 6 7 8 9 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.