From a post we just received from Roberto Avil
Unlike Sparkfun, who actually manage to find fake Atmel ICs, we just get strange batches.
The Atmel ATMega328 is the power behind the Arduino/Freeduino/*duino, and we have to set up a programming system to burn the venerable Arduino Bootloader into these chips.
We normally use an AVR STK500 in HVSP (high voltage serial programming) mode, as that lets us be absolutely sure the fuses are set correctly and the burn is correct. Interestingly enough, this last batch of chips refused to work with our batch files. Asking the chip's ID often returned 0x01 0x03 0X05 instead of the expected signature.
After spending a day checking to see if the programmer was broken (nope) or if the chips were fake (nope, we think), we did find that they did respond to regular old ICSP (in-circuit serial programming), but only partially.
Digging around, we found some older ATMega328 chips that worked fine, and compared them to this new batch. This troublesome batch has a date code of 1015 (15th week of 2010), and a batch code on the bottom as 9J4302 / 35473d / 1-P1015 e3.
So we re-wrote our batch file burning code to use AVRDude instead of the STK500 command-programmer, and to run it in ICSP mode on the STK500. The key addition is the "-B" part, which slows down the communication a bit. You want it as low as possible for fastest burn times. I tried a "-B 2" on both fuse & programming lines, but that really slowed the process. What's below is what we settled on.
: Set fuse bits, lock bits, voltages
.avrdude -c stk500v2 -i 20 -p m328p -P COM1 -b 115200 -B 1.8 -e -u -U lock:w:0x3f:m -U efuse:w:0x05:m -U hfuse:w:0xDA:m -U lfuse:w:0xFF:m
: Burn & Lock Arduino hex bootloader file
.avrdude -c stk500v2 -p m328p -P COM1 -b 115200 -B 1.1 -U flash:w:%HEXFILE% -U lock:w:0x0f:m
Hope that'll save anybody else from blowing better part of a day figuring out why their Atmel isn't programming normally!
From a post we just received from Roberto Avil
Well, it's that time of year for the Solarbotics staff to go spend time with friends and family. With that said, we hope that you all have a safe and happy holiday season, whatever your plans may be. Wednesday, December 24 - Sunday, December 28 -- Closed Monday, December 29 - Wednesday, December 31 -- […]
Here's a nice message from Jack Buffington resulting from our recent trip to Robolympics: "Hi. I just wanted to say thanks to Dave for tipping me off to those new motor/gearboxes that you are selling. He sold two of them to me on Saturday. On Sunday I won the ribbon-climber event using the one of […]
...Well, sorta. We won't have a full booth like we have in past faires, but that's because Austin is sooo far away, and it's not easy to bring all our gear down that far. So we'll be down there assisting in the Maker Store. Feel free to stop by and say hi! We'll be near […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.