Strange set of Atmel '328 ICs...

Dave Hrynkiw
August 26, 2010

Unlike Sparkfun, who actually manage to find fake Atmel ICs, we just get strange batches.

The Atmel ATMega328 is the power behind the Arduino/Freeduino/*duino, and we have to set up a programming system to burn the venerable Arduino Bootloader into these chips.

We normally use an AVR STK500 in HVSP (high voltage serial programming) mode, as that lets us be absolutely sure the fuses are set correctly and the burn is correct. Interestingly enough, this last batch of chips refused to work with our batch files. Asking the chip's ID often returned 0x01 0x03 0X05 instead of the expected signature.

After spending a day checking to see if the programmer was broken (nope) or if the chips were fake (nope, we think), we did find that they did respond to regular old ICSP (in-circuit serial programming), but only partially.

Digging around, we found some older ATMega328 chips that worked fine, and compared them to this new batch. This troublesome batch has a date code of 1015 (15th week of 2010), and a batch code on the bottom as 9J4302 / 35473d / 1-P1015 e3.

So we re-wrote our batch file burning code to use AVRDude instead of the STK500 command-programmer, and to run it in ICSP mode on the STK500. The key addition is the "-B" part, which slows down the communication a bit. You want it as low as possible for fastest burn times. I tried a "-B 2" on both fuse & programming lines, but that really slowed the process. What's below is what we settled on.

: Set fuse bits, lock bits, voltages
.avrdude -c stk500v2 -i 20 -p m328p -P COM1 -b 115200 -B 1.8 -e -u -U lock:w:0x3f:m -U efuse:w:0x05:m -U hfuse:w:0xDA:m -U lfuse:w:0xFF:m
: Burn & Lock Arduino hex bootloader file
.avrdude -c stk500v2 -p m328p -P COM1 -b 115200 -B 1.1 -U flash:w:%HEXFILE% -U lock:w:0x0f:m

Hope that'll save anybody else from blowing better part of a day figuring out why their Atmel isn't programming normally!

MORE POSTS

May 19, 2011
We're CLOSED for Maker Faire

Yeah, we warned you. We're not even in our office to write out this newspost. Nay, this is one of them fancy pre-recorded messages. It may or may not self destruct. So, yes, we're closed from May 19th (Thursday) to the 24th  (Tuesday). We'll resume filling/shipping orders and replying to any correspondance once we're back […]

May 25, 2003
Remember the GM5?

Hoped you ordered one while you had the chance - they're all gone now! I will most likely be a looong time before these come back, so please don't contact us asking for more - it was a rare deal for Solarbotics, which we were glad to bring to you for as long as it […]

April 3, 2013
Wednesday Cool Links: The Best of April ...

Hmmm, April first has come and gone, and we've missed a chance to pretend we are now switching to selling electric squids powered by rabid honey badgers on brooms. To compensate for that disappointment here's an overview of the best April first stories. Underwater Basketweaving This is a new course where students explore the ancient […]

May 14, 2004
GM5 Escaps are back (for now)

Well, we've got a limited supply of GM5(b) escap gear motors available. These really sold quick last time, so get them while you can! See you at the Western Canadian Robot Games tomorrow!

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart