Well, my stint as Makezine's Soldering Makecation councellor is over. Last thing to do is go over the entries and pick some winners. See them here!
Now that the season of mass gift giving is (temporarily) over, publishing the details on this special gift ocarina box for a wedding anniversary will not ruin a surprise. So I figured I'd share this personal project that uses simple but smart electronics.
First I soldered an interrupter switch to the SuperFlex LED Strand with Battery Pack in color purple.
I wanted the drawer that houses the ocarina to be rectangular in shape but also wanted the overall box to be circular. I compromised between the two requirements by making the box a semicircle that looked like a capital "D".
This shape also allowed me to hide the battery pack behind the drawer which was quite convenient!
I attached two laser cut tabs with #4-40 screws to the inside of the box.
They are serving as a stopper to the small lid that will host our battery pack.
Inside view of a battery pack platform.
Another set of #4-40 screws holds the cutout lid on the outside. The battery pack is glued onto it and can be easily accessed for changing batteries or troubleshooting.
Looks neat and concealed.
I attached the interrupter switch right with some #2 thread forming screws at the point where the drawer will sit when fully closed.
This way the LED string will only light up when the drawer opens, releasing the switch, and lighting up the contents of the gift box.
Here is the switch installed in a small cutout in the drawer's containing walls.
The LED string is threaded through a small hole in the back wall of the drawer. A small amount of extra length is stuffed between the containing wall and the back of the drawer so that when the drawer is opened, it does not pull on the LED string.
Now to the decorative part. For the lattice cutout I Google-searched and downloaded a nice vine pattern that I auto-traced in CorelDraw to make it a vector. I tweaked it by bringing the design elements closer together to increase stability, since the pattern is quite delicate. For the final design of the top lid I added a solid circle with text on it (a small quote from our wedding vows). I then laser cut out the vine design and lightly vector-engraved the text in the circle.
To complete the lid top I attached heavy purple card stock from a craft store underneath using a bit of white glue.
The kerf pattern that covers the semi-circular portion of the box was also found online. Every sixth point is slot-and-tab'ed into the top and bottom lids to ensure smooth curvature while maintaining stability.
The whole assembly is done using predominantly white glue - here are the lid layers stacked and pressed together for drying.
The front of the drawer repeats the same pattern as the top, but this time engraved instead of cut through. The crystal knob was found at a local craft store.
And here is the finished product, the intricate vine pattern adds complexity and dimensionality, the light golden wood grain stands out great against the opulent purple backdrop, and the LEDs inside illuminate and highlight the gift.
P.S. The final version added paper straw stuffing that helped to diffuse the light and provide extra cushioning for the fragile ceramic ocarina.
Well, my stint as Makezine's Soldering Makecation councellor is over. Last thing to do is go over the entries and pick some winners. See them here!
Just a quick note for those of you who have been trying to build the SC1 Servocores with the 0.01uF capacitors as listed in the parts list. That's an error! 0.1uF is just fine. Documentation has been revised accordingly. Sorry for the error!
Woot! (Ok, I know it's spelt W007) The Sumovore is featured in volume 4 of Make Magazine in their suggested shopping list! For those of you who don't know about this killer quarterly publication from the fine folks at O'Reilly & Associates, you have to check it out. Makezine is ideal for all you DIY […]
I created this choker as a project to demonstrate the new MicroNova APA102-2020 LED strips. Photo by Yeti, edited by Batgirl These addressable LEDs are extremely small, less than 1/4 the size of a standard 5050 LED. This project was built using engineering sample standard MicroNova 99 LED / meter strips . The MicroNova strips we are selling have 198/meter - […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.