Special Gift Ocarina Box

Solarbotics Ltd
January 10, 2018

Now that the season of mass gift giving is (temporarily) over, publishing the details on this special gift ocarina box for a wedding anniversary will not ruin a surprise. So I figured I'd share this personal project that uses simple but smart electronics.

First I soldered an interrupter switch to the SuperFlex LED Strand with Battery Pack in color purple.

I wanted the drawer that houses the ocarina to be rectangular in shape but also wanted the overall box to be circular. I compromised between the two requirements by making the box a semicircle that looked like a capital "D".

This shape also allowed me to hide the battery pack behind the drawer which was quite convenient!

Ocarina box drawer made with laser cut wooden panels.

I attached two laser cut tabs with #4-40 screws to the inside of the box.

laser cut wooden tabs to hold the battery pack

They are serving as a stopper to the small lid that will host our battery pack.

the lid panel that attaches to the wooden tabs that hold the battery pack in place

Inside view of a battery pack platform.

battery pack lid held in place with screws

Another set of #4-40 screws holds the cutout lid on the outside. The battery pack is glued onto it and can be easily accessed for changing batteries or troubleshooting.

Set of #4-40 screws holds the cutout lid on the outside

Looks neat and concealed.

put together the surface of the battery pack area is flush

I attached the interrupter switch right with some #2 thread forming screws at the point where the drawer will sit when fully closed.

put together the surface of the battery pack area is flush

This way the LED string will only light up when the drawer opens, releasing the switch, and lighting up the contents of the gift box.

attached interrupter switch near the battery pack tabs

Here is the switch installed in a small cutout in the drawer's containing walls.

LED lights inside the draw light up a purple colour with the drawer open because of the interrupter switch

The LED string is threaded through a small hole in the back wall of the drawer. A small amount of extra length is stuffed between the containing wall and the back of the drawer so that when the drawer is opened, it does not pull on the LED string.

The LED string is threaded through a small hole in the back wall of the drawer

Now to the decorative part. For the lattice cutout I Google-searched and downloaded a nice vine pattern that I auto-traced in CorelDraw to make it a vector. I tweaked it by bringing the design elements closer together to increase stability, since the pattern is quite delicate. For the final design of the top lid I added a solid circle with text on it (a small quote from our wedding vows). I then laser cut out the vine design and lightly vector-engraved the text in the circle.

To complete the lid top I attached heavy purple card stock from a craft store underneath using a bit of white glue.

Exterior of the Ocarina Box with the lattice design and the 'For as Long as Love Shall Last,' inscription

The kerf pattern that covers the semi-circular portion of the box was also found online. Every sixth point is slot-and-tab'ed into the top and bottom lids to ensure smooth curvature while maintaining stability.

Kerf pattern lattice made with laser cut wood

The whole assembly is done using predominantly white glue - here are the lid layers stacked and pressed together for drying.

using white glue and a weighted box, the lid sets while the glue dries

The front of the drawer repeats the same pattern as the top, but this time engraved instead of cut through. The crystal knob was found at a local craft store.

The completed ocarina box with the drawer closed

And here is the finished product, the intricate vine pattern adds complexity and dimensionality, the light golden wood grain stands out great against the opulent purple backdrop, and the LEDs inside illuminate and highlight the gift.

The completed ocarina box with the drawer closed

P.S. The final version added paper straw stuffing that helped to diffuse the light and provide extra cushioning for the fragile ceramic ocarina.

MORE POSTS

April 28, 2004
Sumovore Atmel Brainboard Add-on

Ah, it's here! Featuring the Atmel Mega8 processor, this brainboard offers pretty powerful features. Check it out!

June 11, 2007
Solarbotics looking for fun people

...oh, and they also should want to work with us. We have a few positions open we want to fill with people that have a good sense of humour, have some geek qualities, and can tell the difference between a diode and resistor (or sincerely want to learn!) Here are the types of people we're […]

October 18, 2004
Transistor turns 50!

Well, 50 years ago today, the Regency TR-1 transistor radio was unleashed on the masses. As the first transistor-based radio on the market, it made a splash. And here we are, 50 years later, making robots out of the same technology. Regenchy TR-1, Solarbotics salutes you!

April 26, 2016
Arc Reactor Kit Assembly Instructions

Arc Reactor Kit Build Instructions Here's a quick blog on how to assemble the Arc Reactor Kit - Limited Edition. 1. Remove brown paper from all 4 acrylic pieces - the pieces are actually clear, so remove all the paper from both sides.

1 17 18 19 20 21 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.