Special Gift Ocarina Box

Dilan Tuff-Overes
January 10, 2018

Now that the season of mass gift giving is (temporarily) over, publishing the details on this special gift for a wedding anniversary will not ruin a surprise. So I figured I'd share this personal project that uses simple but smart electronics.

First I soldered an interrupter switch to the SuperFlex LED Strand with Battery Pack in color purple.

 

 

I wanted the drawer that houses the ocarina to be rectangular in shape but also wanted the overall box to be circular. I compromised between the two requirements by making the box a semicircle that looked like a capital "D". 

This shape also allowed me to hide the battery pack behind the drawer which was quite convenient!

I attached two laser cut tabs with #4-40 screws to the inside of the box.

They are serving as a stopper to the small lid that will host our battery pack.

Inside view of a battery pack platform.

Another set of #4-40 screws holds the cutout lid on the outside. The battery pack is glued onto it and can be easily accessed for changing batteries or troubleshooting. 

Looks neat and concealed.

I attached the interrupter switch right with some #2 thread forming screws at the point where the drawer will sit when fully closed.

This way the LED string will only light up when the drawer opens, releasing the switch, and lighting up the contents of the gift box.

Here is the switch installed in a small cutout in the drawer's containing walls.

The LED string is threaded through a small hole in the back wall of the drawer. A small amount of extra length is stuffed between the containing wall and the back of the drawer so that when the drawer is opened, it does not pull on the LED string.

Now to the decorative part. For the lattice cutout I Google-searched and downloaded a nice vine pattern that I auto-traced in CorelDraw to make it a vector. I tweaked it by bringing the design elements closer together to increase stability, since the pattern is quite delicate. For the final design of the top lid I added a solid circle with text on it (a small quote from our wedding vows). I then laser cut out the vine design and lightly vector-engraved the text in the circle.

To complete the lid top I attached heavy purple card stock from a craft store underneath using a bit of white glue.

The kerf pattern that covers the semi-circular portion of the box was also found online. Every sixth point is slot-and-tab'ed into the top and bottom lids to ensure smooth curvature while maintaining stability.

The whole assembly is done using predominantly white glue - here are the lid layers stacked and pressed together for drying.

The front of the drawer repeats the same pattern as the top, but this time engraved instead of cut through. The crystal knob was found at a local craft store.

And here is the finished product, the intricate vine pattern adds complexity and dimensionality, the light golden wood grain stands out great against the opulent purple backdrop, and the LEDs inside illuminate and highlight the gift. 

P.S. The final version added paper straw stuffing that helped to diffuse the light and provide extra cushioning for the fragile ceramic ocarina.

 

 

MORE POSTS

August 22, 2014
Friday New Product: Brackets, Power Jack...

Woooo, new stuff, finally here! OpenBeam T Joining Plate, Anodized Aluminum - 2 Pack $1.90 T-shaped joining plates for all your OpenBeam creations! OpenBeam L Joining Plate, Anodized Aluminum - 2 Pack $1.90 L-shaped joining plates for all your OpenBeam creations! This one handily supports 45 & 90 angles. 5.5-2.1mm DC Power Jack - Female […]

April 24, 2009
PICAXE is dead! Long live PICAXE!

Well we hate to break it to you, but the PICAXE-40X1 has kicked the bucket. Shuffled off the mortal coil.  Wacked, given up the ghost, became living-challenged, croaked, sprouted wings, snuffed out. "IT'S NOT DEAD! JUST PINING FOR THE FJORDS!" Well, that's not the case. But is does (did?) have beautiful plumage. But that's okay […]

February 17, 2021
Wire and Cable Now Available at Solarbot...

An awesome catalog of wire for all of your project needs! We now have a good selection of stranded wire, solid wire, as well as multi conductor cable. If you have any wire requests that are not available online please reach out to support@solarbotics.com and we will see what we can do.

July 4, 2012
Cool Link Wednesday: Nixie Chess, Makerb...

It's July 4th! That means all of our pals to the south of the border are having a grand ol' time celebrating their independence from British colonialism and extra-terrestrial invasion. So in honour of their national holiday and the fact that it's a Wednesday, we have another round of neat links to sift through. Nixie […]

1 5 6 7 8 9 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart