Special Gift Ocarina Box

Dilan Tuff-Overes
January 10, 2018

Now that the season of mass gift giving is (temporarily) over, publishing the details on this special gift for a wedding anniversary will not ruin a surprise. So I figured I'd share this personal project that uses simple but smart electronics.

First I soldered an interrupter switch to the SuperFlex LED Strand with Battery Pack in color purple.

 

 

I wanted the drawer that houses the ocarina to be rectangular in shape but also wanted the overall box to be circular. I compromised between the two requirements by making the box a semicircle that looked like a capital "D". 

This shape also allowed me to hide the battery pack behind the drawer which was quite convenient!

I attached two laser cut tabs with #4-40 screws to the inside of the box.

They are serving as a stopper to the small lid that will host our battery pack.

Inside view of a battery pack platform.

Another set of #4-40 screws holds the cutout lid on the outside. The battery pack is glued onto it and can be easily accessed for changing batteries or troubleshooting. 

Looks neat and concealed.

I attached the interrupter switch right with some #2 thread forming screws at the point where the drawer will sit when fully closed.

This way the LED string will only light up when the drawer opens, releasing the switch, and lighting up the contents of the gift box.

Here is the switch installed in a small cutout in the drawer's containing walls.

The LED string is threaded through a small hole in the back wall of the drawer. A small amount of extra length is stuffed between the containing wall and the back of the drawer so that when the drawer is opened, it does not pull on the LED string.

Now to the decorative part. For the lattice cutout I Google-searched and downloaded a nice vine pattern that I auto-traced in CorelDraw to make it a vector. I tweaked it by bringing the design elements closer together to increase stability, since the pattern is quite delicate. For the final design of the top lid I added a solid circle with text on it (a small quote from our wedding vows). I then laser cut out the vine design and lightly vector-engraved the text in the circle.

To complete the lid top I attached heavy purple card stock from a craft store underneath using a bit of white glue.

The kerf pattern that covers the semi-circular portion of the box was also found online. Every sixth point is slot-and-tab'ed into the top and bottom lids to ensure smooth curvature while maintaining stability.

The whole assembly is done using predominantly white glue - here are the lid layers stacked and pressed together for drying.

The front of the drawer repeats the same pattern as the top, but this time engraved instead of cut through. The crystal knob was found at a local craft store.

And here is the finished product, the intricate vine pattern adds complexity and dimensionality, the light golden wood grain stands out great against the opulent purple backdrop, and the LEDs inside illuminate and highlight the gift. 

P.S. The final version added paper straw stuffing that helped to diffuse the light and provide extra cushioning for the fragile ceramic ocarina.

 

 

MORE POSTS

June 19, 2013
Cool Links Wednesday: Bike Lanes and Neu...

Oh the rain… Oh the 90% humidity… This is the monsoon that happens sometimes in Albertaland. The rain floods basements, frizzes hair, overflows rivers. What is doesn’t do is dryclean the basement carpets, straighten hair, and apply various agricultural procedures of soil draining. Neither it brings you cool links! Which are by some strange coincidence […]

March 21, 2014
Friday New Product: MaKey Deluxe, Tiny L...

New stuff! See? Here it is, in the neat little boxes below: MaKey MaKey - Deluxe Kit $59.95 You may be the greatest living banana-pianist, but how will you ever know if you don't make yourself a banana piano? Good news, that project and countless others are easier than you think they are with MaKey […]

May 22, 2012
Reset Addresses

Hey everyone, just a quick heads-up - there's was a bit of a technical hiccup with some account data, so we've had to clean out any stored addresses. We just know how much fun it is to type it in again, but fortunately any address that's used with an order will automatically get saved to […]

October 22, 2002
Solarbotics at the ECRG

Well, somebody from Solarbotics will be at the Eastern Canadian Robot Games, namely Dave Hrynkiw, and Grant McKee. If you're going to be out in the Toronto region this weekend (October 26 and 27), come by and see the games at the Ontario Science Center!

1 11 12 13 14 15 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart