Solarbotics Takes Over Active-Tech Calga...

Here's another bunch of links for your viewing pleasure. Under the current meteorological conditions we wonder who would consider looking at screens, because, you know, real life takes over sometimes, especially when it is so nice outside, at least in our neighborhood. A clock that uses sixty RGB pixels Hey, we made that! Well, almost. This […]

Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current: After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate […]

The following instructions detail how to build a Solar Power Smart Head version 3. The Head will seek light and when it finds the brightest source it will go into a low current standby mode. This version also comes with an low power FLED circuit to indicate when the head is active.

Lets contabulate! And that means, as I recently learned, to cover with boards, which in our case are - breadboards. Today's breadboard coverage is only partial, as we have other stuff to show off too: Synapse "Getting Started" Transmitter Bundle $49.99 Add a Wii Nunchuck and battery to this bundle and you'll have a simple […]