Well today we are presenting things! Here's how they work. GSM shield comes supplied with a sticker that you can draw a little arrow on it, and then you mount the shield on a stick, and it will show the direction of where you have to go. To set the direction whisper your exact latitude […]
Solarbotics SolarSpeeder competition
Dave Hrynkiw
May 10, 2006
The Western Canadian Robot Games are close at hand (umm... this weekend!), and in response to popular request, we're cranking up the SolarSpeeder contest again!
Ever built a Solarbotics SolarSpeeder? Bring it down to the games, enter at our booth (free!), and we'll run a SolarSpeeder target race. Aim your racer at a 10cm (4") wide gap at the far end of an 8' x 4' platform, and the closest one wins a prize. Get it through the gap and win BIG!
Oh, an you may even go up against our new SolarSpeeder 1.2 prototype!
MORE POSTS
Useless Box Featured on Tested
The Solarbotics Useless Box has been featured on this week's Show and Tell at Tested!
OpenBeam & Nightmares in China Sour...
We've been a big fan of Openbeam for a long time, and when Terence Tam started producing 3D printers using this material, we were hopeful that this would be a great fit for his operation. Nice material, great engineering - what could go wrong? LOTS. Follow his spiral down the Asian rabbit-hole when his selected […]
Robolympics coming up...
The Robolympics are coming up. Interesting list of events, and last year's was quite a blast... Just so you know!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.