Solarbotics boards HVWTech!

Dave Hrynkiw
April 1, 2007








SB Eats HVWTech!

Yes, it's true. After years of working our fingers to the bone inserting
jumper wires on breadboards to make unusually robust controllers for robots out
of discrete & logic chip elements, Solarbotics has seen the light!
We've put on our eye-patch, hoisted the jolly-roger, and swung along-side to
board the HMS HVWTech.com !


That's right - we've hijacked HVW Technologies, that prim and proper proprietor of embedded
microcontroller systems. We'll we working to get our keyboarding skills up to speed with all this new-fangled "programming" we've heard so much about....

Yaaarrrr!

MORE POSTS

April 12, 2009
"Most Adorable Robot Experiment Ever"

Cute project in NYC with a friendly little cardboard robot that interacts with the "gruff" population of NYC ...And if you look closely, there's something about the wheels that look familiar!

January 9, 2012
Phones are Up

Well, we've found the ringleaders in this little impromptu telecommunications insurrection and took them out back, where we switched from our standard 'beat with a metaphorical hammer' to 'beat with an real hammer'. Which worked so well, actually, that our phones are now back up and behaving themselves. We can now take calls without any […]

January 11, 2017
Heated Car Seat Teardown and Repair

Here's a little makeover of an inexpensive aftermarket heated car seat heating pad that stopped working. Designed to activate and warm up when sat upon, the electronics face a fair amount of abuse: since the seat is a soft frame, the wires inside constantly move and flex with the body. They are also subject to […]

July 12, 2007
BEP Application: Turbot

The Turbot is a member of the Scophthalmidae family of flatfish and is almost completely circular. Turbot is often found partially buried in the seabed in sand, gravel, rocks and sediment. Its fat content varies, but it usually contains roughly 1 gram of omega-3 fatty acids per 100g fillet. Barring advances in genetic engineering, we will not be building that kind of Turbot. However, this kind of Turbot can be built with a soldering iron.

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart