We had some requests for some really, really small Pogo Push Pin Probes (Hmmm...shoulda named them PPPPs...). Anyway, here's the PP8s and the PPH2, which are the "short" version of the PP8 and the necessary holder to mount them. If you have really tight spaces you need to test, these are the probes you'll need!
Solarbotics boards HVWTech!
Dave Hrynkiw
April 1, 2007
 | Yes, it's true. After years of working our fingers to the bone inserting
That's right - we've hijacked HVW Technologies, that prim and proper proprietor of embedded Yaaarrrr! |
MORE POSTS
SCC3733 Solarcell hacking
Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current: After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate […]
BEAM Tools - See What We Use
We asked Grant, our resident BEAM technician, to come up with a list of some of the tools he uses, and here we have it! This list will help those first starting out to see what they should use, and for those who've been doing it awhile we have some of our more advanced tools. […]
GM10's not here yet!
We fully expected that the boat would beat your copy of "Nuts and Volts". Apparently it hasn't! Our GM10's are due this Thursday (the 6th of November), so stay tuned for the official release then. No, we don't have pricing yet - it depends on what our total shipping cost comes out to be. Stay […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.