We are currently experiencing some temporary mail difficulties. If you are trying to reach us by Email and do not hear back from us please call us toll-free at 1-866-276-2687. We are sorry for any inconvenience this may cause.
Solarbotics at Bay Area Maker Faire ...S...
Dave Hrynkiw
May 10, 2012
Guess what! Like every year, from May 19-20 Solarbotics is going to be at the Bay Area Maker Faire! Well, kinda. While we usually run a full booth to show off all our cool BEAM and Arduino stuff (we even ran a totally rockin' ARDX workshop last time), it unfortunately looks like costs have risen a bit too much for us to be involved as we wish we could be. But that's okay! DO NOT FRET, FELLOW HUMAN! As with every year, you can still find us hanging out in the Maker Shed - the official store for the show. We'll have lots of our stuff for you to look at and play with, and would love nothing more than for you to drop by and say hello. So if you're in the San Fransisco/San Mateo area next weekend, be sure to check out the Faire and meet some Solarbotians.
...we're not sure if 'Solarbotian' is a proper word, but it is now. If it's in a newspost, it's gotta be official.
MORE POSTS
Sumovore Line-follower
This link is a bit on the old side, but if you are thinking of entering the WCRG event next month, here's last year's champion's (Craig Limber) webpage about turning his Sumovore into an almost-as-good line follower! It's a good way to get into this rapidly-growing event...
New Bundle: The Northern Lights!
Ok, more like The Northern light. There's only one, but it creates lots of light! We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible. We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs. We […]
Lulzbot 3D Printer Documentation and Res...
Lulzbot Mini 2 Documentation Lulzbot Mini 2 Quick Start Guide Lulzbot Mini 2 Quick Start Video How to use the LCD Interface Video How to Replace a Damaged/Bubbled PEI Sheet Video How to update your firmware Video How to use Cura: Lulzbot Edition Software Video (slightly outdated but relevant) Lulzbot Mini 2 Detailed Calibration and […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.