Our GraviTrack Marble Machine Kit is our newest addition to the Marble-Drop mechanism family. Elegant, swooping hands pass marbles to each other to the top of a sweeping multi-level track, available in either solar or battery configuration! Approximately twice as wide as our spiral Solar or Battery Marble machine kits, the GraviTrack is still desk-top compact but large enough for easy mechanical assembly. Pre-order yours […]
Solarbotics at Calgary Comic Expo 2013
Solar botics
April 30, 2013
Whelp, many moons have passed since we posted last time (er, maybe that's a slight exaggeration), and many a thing have happened. We went to Las Vegas to the Magento conference, lasered some ukuleles, but mostly were in a mad rush preparing for the Calgary Comic & Entertainment Expo 2013. We teamed up with a wonderful costume designer and artist Angela Dale to produce wearable pieces that merge electronics and costume design.
Here's the first example - joint effort of Graeme Janzen, Angela Dale and Solarbotics. Custom Fosshape molded helmet is fitted perfectly to the wearer, and 3 layers of lasercut acrylic are edge-lit with 24 high-power white LEDs:
Our Voltron Helmet is based on the Black Lion toy design from Defender of the Universe, a popular cartoon in the mid eighties. Voltron consisted of 5 robot lions that joined together to form a Giant Robot that protected the galaxy from evil doers. The Black Lion in particular is special because it formed the head and torso of the combined Robot Voltron. Since the head had two different modes: Robot and Lion, it was intriguing to try to emulate the two modes as best as we could.
We used an Ardweeny, Multipack, TTLy FTDI, 2 Star Controllers, and 2 HXT900 servos to animate our replica and make it come alive with a few electronic bits. Special thanks to Angela Dale and Robyn Ayles (props designer and full-time faculty at the Mount Royal theater program) for their assistance!
This Chameleon Cocktail Ensemble was created by Angela and her assistants as a part of MakeFashion project. It uses 20 meter of addressable LED strips (add 5 meters in the headdress) powered by 3.7V LiPoly batteries, and ArduinoPro Mini to control the lighting sequences.
We also hosted the Arduino workshop at the Expo, with a slight costuming application bend and many blinky lights...
..and did lots of people watching.
Check out our Flickr photostream for details on more projects and photos!
MORE POSTS
Bundles o' Brains
What's worse than having to wait nine months? Having to wait a year and nine months. That's where we're finding ourselves, with Beakerhead here in Calgary aiming to land in September of 2013. Luckily, though, this festival of art fused with technology (think MakerFaire) will have a few smaller events between now and then. We […]
New Product, Closed for Good Friday
Fun fact: Tomorrow is Good Friday. By default, that means for the other 51 weeks of the year we experience Bad Fridays. We're not quite sure what exactly makes them so undesirable per se, but because the chance to celebrate a Good Friday comes around so infrequently, we've got to act on it, dangit. So […]
Circuit: Herbie by Randy Sargent
Although not a true BEAM robot, this simple schematic by Randy Sargent is small, simple, slick, and effective. My own version uses a pair of pager motors and three cells from a 9V rechargeable battery. Hard to get any simpler than this device!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.