Today August 21, 2017, we were treated to about 80% solar eclipse. In spite of the smoke, the weather cooperated so we couldn't miss this event. Pinhole projector boxes were made out of cereal and shipping boxes: Fancy ones were mounted onto a tripod, and a phone camera recording a time lapse video was taped to […]
Solarbotics at Calgary Comic Expo 2013
Solar botics
April 30, 2013
Whelp, many moons have passed since we posted last time (er, maybe that's a slight exaggeration), and many a thing have happened. We went to Las Vegas to the Magento conference, lasered some ukuleles, but mostly were in a mad rush preparing for the Calgary Comic & Entertainment Expo 2013. We teamed up with a wonderful costume designer and artist Angela Dale to produce wearable pieces that merge electronics and costume design.
Here's the first example - joint effort of Graeme Janzen, Angela Dale and Solarbotics. Custom Fosshape molded helmet is fitted perfectly to the wearer, and 3 layers of lasercut acrylic are edge-lit with 24 high-power white LEDs:
Our Voltron Helmet is based on the Black Lion toy design from Defender of the Universe, a popular cartoon in the mid eighties. Voltron consisted of 5 robot lions that joined together to form a Giant Robot that protected the galaxy from evil doers. The Black Lion in particular is special because it formed the head and torso of the combined Robot Voltron. Since the head had two different modes: Robot and Lion, it was intriguing to try to emulate the two modes as best as we could.
We used an Ardweeny, Multipack, TTLy FTDI, 2 Star Controllers, and 2 HXT900 servos to animate our replica and make it come alive with a few electronic bits. Special thanks to Angela Dale and Robyn Ayles (props designer and full-time faculty at the Mount Royal theater program) for their assistance!
This Chameleon Cocktail Ensemble was created by Angela and her assistants as a part of MakeFashion project. It uses 20 meter of addressable LED strips (add 5 meters in the headdress) powered by 3.7V LiPoly batteries, and ArduinoPro Mini to control the lighting sequences.
We also hosted the Arduino workshop at the Expo, with a slight costuming application bend and many blinky lights...
..and did lots of people watching.
Check out our Flickr photostream for details on more projects and photos!
MORE POSTS
'Twas the night before Christmas...
'Twas the night before Christmas and all through the shop Not a creation was stirring (except the Turbot!). All robots had been packed and shipped with care, With hope, to their destination, they soon would be there. The bosses and staff were heading home straight To settle down to gift wrapping, probably 'til late. When out […]
LANL 2001 Pictures and other Website stu...
We have pictures from the Los Alamos National Labs Workshops! Check them out under the Gallery heading, or at the bottom of this post. We are having temporary difficulties with our Solarbotics.net server, eliminating the ability to read PDF files or downloads. This should be rectified soon. Also, in the transfer process, everyone who asked […]
Sumovore Line-follower
This link is a bit on the old side, but if you are thinking of entering the WCRG event next month, here's last year's champion's (Craig Limber) webpage about turning his Sumovore into an almost-as-good line follower! It's a good way to get into this rapidly-growing event...
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.