GroovyNoodle wire. Some is good; LOTS is better. We absolutely love our GroovyNoodle wire, with its super flexibility and silicone-jacket insulation in 7.5M "casual use" spools. For more ambitious projects that need more length, we now have our GroovyNoodle in value-priced 50 meter spools! It's more of our favorite 24AWG wire with a whopping 40 […]
Solarbotics at Calgary Comic Expo 2013
Solar botics
April 30, 2013
Whelp, many moons have passed since we posted last time (er, maybe that's a slight exaggeration), and many a thing have happened. We went to Las Vegas to the Magento conference, lasered some ukuleles, but mostly were in a mad rush preparing for the Calgary Comic & Entertainment Expo 2013. We teamed up with a wonderful costume designer and artist Angela Dale to produce wearable pieces that merge electronics and costume design.
Here's the first example - joint effort of Graeme Janzen, Angela Dale and Solarbotics. Custom Fosshape molded helmet is fitted perfectly to the wearer, and 3 layers of lasercut acrylic are edge-lit with 24 high-power white LEDs:
Our Voltron Helmet is based on the Black Lion toy design from Defender of the Universe, a popular cartoon in the mid eighties. Voltron consisted of 5 robot lions that joined together to form a Giant Robot that protected the galaxy from evil doers. The Black Lion in particular is special because it formed the head and torso of the combined Robot Voltron. Since the head had two different modes: Robot and Lion, it was intriguing to try to emulate the two modes as best as we could.
We used an Ardweeny, Multipack, TTLy FTDI, 2 Star Controllers, and 2 HXT900 servos to animate our replica and make it come alive with a few electronic bits. Special thanks to Angela Dale and Robyn Ayles (props designer and full-time faculty at the Mount Royal theater program) for their assistance!
This Chameleon Cocktail Ensemble was created by Angela and her assistants as a part of MakeFashion project. It uses 20 meter of addressable LED strips (add 5 meters in the headdress) powered by 3.7V LiPoly batteries, and ArduinoPro Mini to control the lighting sequences.
We also hosted the Arduino workshop at the Expo, with a slight costuming application bend and many blinky lights...
..and did lots of people watching.
Check out our Flickr photostream for details on more projects and photos!
MORE POSTS
Microsoft ... BEAM Robots?!?
Solarbotics held a few workshops and lectures at the MAKEr faire April 22/23rd. After giving a workshop, a nice man from Microsoft invited me over to see their BEAM robots. Obviously intregued, I found their display at the Microsoft pavilion where Microsoft encouraged all their engineers with "MAKE"-style hobbies to exhibit, including this squad of […]
Solar Pendulum of DOOOM blogged on MAKE
I love MAKE magazine. I always enjoy reading (then trying) the projects in each magazine. I was a bit disappointed in their last issue where they didn't cover the complete process to make gunpowder, but that's a minor complaint. I just noticed on their blog that they're talking about our Solar Pendulum kit and Christopher […]
Guaranteed Results Workshop at WCRG
Solarbotics is again hosting a Guaranteed Results workshop at the Western Canadian Robot Games, on Friday May 10th, noon to 4pm. It works like this: Pick up any kits from Solarbotics before (or of the day) the workshop, bring it in, and we'll have tools and expertise there to make sure your kit goes together […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.