This circuit is used to create a simple "edgebot" sumo robot. Being an edgebot refers that it will repeat the same backup/turn/go forward action when it's single edge sensor detects the edge of the ring. This version of the circuit is quite simple, and always turns the same way.
SMARTBEAM! Ok, it's really microcontroll...
Dave Hrynkiw
October 2, 2008
It's been in the coming for a while, and now is the time to release it to the webosphere (yes, I said "Web-o-sphere").
Since Solarbotics Ltd. took over HVW Technologies, we simply couldn't ignore some of the benefits of microcontrollers. Really, they're not that scary. Many of them even look like our good friend the 74AC240 IC.
We're starting our blending of technologies with the PICAXE line of microcontrollers. These have some specific features that make them very usable with BEAM projects:
- They're inexpensive. Most of us BEAMers are a cheap lot, scavenging for parts.
- They're SIMPLE. Plug in a USB cable, draw flow-charts, and download the code!
- They offer suitability. With over 13 types from very simple and small (08 series) to the powerful 40X1 series, you can pick the right tool for the job, without overkill. How BEAM-ish.
So if you've become too comfortable with your latest techniques, try something new. Stretch your brain, and check out the PICAXE. We've even got starter packs, and a book!
Besides the PICAXE, we're also dabbling with the Freeduino SB. This is a project spawned from the Arduino project out of Italy. It's an open-source hardware and software project using the Atmel ATmega168 microcontroller.The really cool thing is that that it's open-source, there's a huge world-wide community of developers and users, so there's lots of help, source-code, and examples to start with.
It's more expensive than the PICAXE, but it's a different beast. Where the PICAXE is generally just the chip, Freeduino is a full system. Besides the microcontroller, the Freeduino includes:
- USB interface (so you just plug it into your PC to use it. That's it!)
- Programming software usable on Windows, Mac, and Linux,
- Programming language that is C-like, but simpler
- Built-in voltage regulation, indicator LEDs and a FUSE. How beginner-friendly is that? (Very!)
So if you're more programming savvy than flowcharts and BASIC, check out a Freeduino SB, and do some web-searches. It's an very useable, handy platform!
MORE POSTS
Solarbotics at the MAKER FAIRE
We are going to be at one of the two coolest shows on earth, the San Francisco Bay Area MAKER FAIRE! (The other coolest show is the Austin version!) So we are packing up shop and heading down to beautiful California where it's warm and not snowing! If you are in the area, have a […]
SparkFun Free Day, Practical Arduino
Alrighty, the week has already slid by and it's time for another update. We have one new product to show off - Practical Arduino by Jonathan Oxer and Hugh Blemings. It contains 13 projects packed into 16 chapters/420+ pages, covering a wide array of an Arduino's potential. It's a pretty comprehensive read. Perhaps the biggest […]
Push Pogo Pins Update
We've received word that we will be receiving new stock on all our push pogo pins, but they will not be available for order until October 8 or 9th. The order link will be restored when the inventory arrives.
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.