SMARTBEAM! Ok, it's really microcontroll...

Dave Hrynkiw
October 2, 2008

It's been in the coming for a while, and now is the time to release it to the webosphere (yes, I said "Web-o-sphere").

Since Solarbotics Ltd. took over HVW Technologies, we simply couldn't ignore some of the benefits of microcontrollers. Really, they're not that scary. Many of them even look like our good friend the 74AC240 IC.

PICAXE Starter kitWe're starting our blending of technologies with the PICAXE line of microcontrollers. These have some specific features that make them very usable with BEAM projects:

  1. They're inexpensive. Most of us BEAMers are a cheap lot, scavenging for parts.
  2. They're SIMPLE. Plug in a USB cable, draw flow-charts, and download the code!
  3. They offer suitability. With over 13 types from very simple and small (08 series) to the powerful 40X1 series,  you can pick the right tool for the job, without overkill. How BEAM-ish.

So if you've become too comfortable with your latest techniques, try something new. Stretch your brain, and check out the PICAXE. We've even got starter packs, and a book!


Besides the PICAXE, we're also dabbling with the Freeduino SB. This is a project spawned from the Arduino project out of Italy. It's an open-source hardware and software project using the Atmel ATmega168 microcontroller.The really cool thing is that that it's open-source, there's a huge world-wide community of developers and users, so there's lots of help, source-code, and examples to start with.Freeduino SB

It's more expensive than the PICAXE, but it's a different beast. Where the PICAXE is generally just the chip, Freeduino is a full system. Besides the microcontroller, the Freeduino includes:

  • USB interface (so you just plug it into your PC to use it. That's it!)
  • Programming software usable on Windows, Mac, and Linux,
  • Programming language that is C-like, but simpler
  • Built-in voltage regulation, indicator LEDs and a FUSE. How beginner-friendly is that? (Very!)

So if you're more programming savvy than flowcharts and BASIC, check out a Freeduino SB, and do some web-searches. It's an very useable, handy platform!

MORE POSTS

February 19, 2002
BEP Documentation Correction... part 2!

Thanks to an observant BEP user, a schematic inconsistancy in the IMx (Inverting Multiplexor) module was discovered, located, and eradicated. If you're interested in keeping your BEP documentation totally updated, get a fresh copy of it from here.

October 23, 2023
Protected: 3D Printer Training - Crealit...

There is no excerpt because this is a protected post.

March 16, 2012
New Synapse Stuff n' Stuff

Well. Hello there. It's been a while, hasn't it? Have have you been doing? How did that thing end up going for you? And those mutual acquaintances of ours? All doing well, we hope. Except for that one mutual acquaintance. You know, the one with the eye patch and kangaroo. I don't know about you, […]

November 2, 2003
GM10's not here yet!

We fully expected that the boat would beat your copy of "Nuts and Volts". Apparently it hasn't! Our GM10's are due this Thursday (the 6th of November), so stay tuned for the official release then. No, we don't have pricing yet - it depends on what our total shipping cost comes out to be. Stay […]

1 59 60 61 62 63 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart