After another marathon documentation-writing session, we're proud to announce that both "Herbie the Mousebot" and the "Photopopper 5.0" are in full production! Just in time for Christmas!
SMARTBEAM! Ok, it's really microcontroll...
Dave Hrynkiw
October 2, 2008
It's been in the coming for a while, and now is the time to release it to the webosphere (yes, I said "Web-o-sphere").
Since Solarbotics Ltd. took over HVW Technologies, we simply couldn't ignore some of the benefits of microcontrollers. Really, they're not that scary. Many of them even look like our good friend the 74AC240 IC.
We're starting our blending of technologies with the PICAXE line of microcontrollers. These have some specific features that make them very usable with BEAM projects:
- They're inexpensive. Most of us BEAMers are a cheap lot, scavenging for parts.
- They're SIMPLE. Plug in a USB cable, draw flow-charts, and download the code!
- They offer suitability. With over 13 types from very simple and small (08 series) to the powerful 40X1 series, you can pick the right tool for the job, without overkill. How BEAM-ish.
So if you've become too comfortable with your latest techniques, try something new. Stretch your brain, and check out the PICAXE. We've even got starter packs, and a book!
Besides the PICAXE, we're also dabbling with the Freeduino SB. This is a project spawned from the Arduino project out of Italy. It's an open-source hardware and software project using the Atmel ATmega168 microcontroller.The really cool thing is that that it's open-source, there's a huge world-wide community of developers and users, so there's lots of help, source-code, and examples to start with.
It's more expensive than the PICAXE, but it's a different beast. Where the PICAXE is generally just the chip, Freeduino is a full system. Besides the microcontroller, the Freeduino includes:
- USB interface (so you just plug it into your PC to use it. That's it!)
- Programming software usable on Windows, Mac, and Linux,
- Programming language that is C-like, but simpler
- Built-in voltage regulation, indicator LEDs and a FUSE. How beginner-friendly is that? (Very!)
So if you're more programming savvy than flowcharts and BASIC, check out a Freeduino SB, and do some web-searches. It's an very useable, handy platform!
MORE POSTS
Sumovore Line-follower
This link is a bit on the old side, but if you are thinking of entering the WCRG event next month, here's last year's champion's (Craig Limber) webpage about turning his Sumovore into an almost-as-good line follower! It's a good way to get into this rapidly-growing event...
SCC3733 Solarcell hacking
Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current: After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate […]
Calgary Stampede - YaHOOO!
Don't expect too much productivity out of Solarbotics in the next 11 days as the Calgary Stampede commences tomorrow morning with the annual parade. The boss (me, Dave) is giving the morning off to the staff to see the festivities, so we'll be open at 1pm Friday July 8. As for the better part of […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.