Ok, more like The Northern light. There's only one, but it creates lots of light! We made the SB-Firefly as a ATtiny85-based blinky light / "chewing-gum & duct-tape problem solver", that is also Digispark compatible. We made the Star Controller 3-watt RGB LED kit as an easy way to tame bright and power-hungry LEDs. We […]
SMARTBEAM! Ok, it's really microcontroll...
Dave Hrynkiw
October 2, 2008
It's been in the coming for a while, and now is the time to release it to the webosphere (yes, I said "Web-o-sphere").
Since Solarbotics Ltd. took over HVW Technologies, we simply couldn't ignore some of the benefits of microcontrollers. Really, they're not that scary. Many of them even look like our good friend the 74AC240 IC.
We're starting our blending of technologies with the PICAXE line of microcontrollers. These have some specific features that make them very usable with BEAM projects:
- They're inexpensive. Most of us BEAMers are a cheap lot, scavenging for parts.
- They're SIMPLE. Plug in a USB cable, draw flow-charts, and download the code!
- They offer suitability. With over 13 types from very simple and small (08 series) to the powerful 40X1 series, you can pick the right tool for the job, without overkill. How BEAM-ish.
So if you've become too comfortable with your latest techniques, try something new. Stretch your brain, and check out the PICAXE. We've even got starter packs, and a book!
Besides the PICAXE, we're also dabbling with the Freeduino SB. This is a project spawned from the Arduino project out of Italy. It's an open-source hardware and software project using the Atmel ATmega168 microcontroller.The really cool thing is that that it's open-source, there's a huge world-wide community of developers and users, so there's lots of help, source-code, and examples to start with.
It's more expensive than the PICAXE, but it's a different beast. Where the PICAXE is generally just the chip, Freeduino is a full system. Besides the microcontroller, the Freeduino includes:
- USB interface (so you just plug it into your PC to use it. That's it!)
- Programming software usable on Windows, Mac, and Linux,
- Programming language that is C-like, but simpler
- Built-in voltage regulation, indicator LEDs and a FUSE. How beginner-friendly is that? (Very!)
So if you're more programming savvy than flowcharts and BASIC, check out a Freeduino SB, and do some web-searches. It's an very useable, handy platform!
MORE POSTS
Strange set of Atmel '328 ICs...
Unlike Sparkfun, who actually manage to find fake Atmel ICs, we just get strange batches. The Atmel ATMega328 is the power behind the Arduino/Freeduino/*duino, and we have to set up a programming system to burn the venerable Arduino Bootloader into these chips. We normally use an AVR STK500 in HVSP (high voltage serial programming) mode, […]
Weekend Tidbits
Being April in Calgary, it should come as no surprise to any of you that yesterday we had a lovely blizzard which melted and froze, coating everything in a delicious layer of ice. This, of course, is somehow connected to the fact that Solarbotics El Presidante, Dave, is currently in Las Vegas where it is […]
Robotgames registration is open
The Western Calgary Robot Games is fast approaching. It's held here in our own hometown of Calgary Alberta, and I can tell you that after visiting most of the major competitions on the west coast of North America, it's one of the most prize-generous! The registration page is now open, so get registered and come […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.