Solarbotics has been a regular at the Calgary Comic & Entertainment Expo for quite a few years now. Throughout the years we've shown off multiple projects that we created ourselves and in collaboration with some brilliant costume and prop designers. Here is a recap of the most impressive projects. We are always happy to assist […]
SMARTBEAM! Ok, it's really microcontroll...
Dave Hrynkiw
October 2, 2008
It's been in the coming for a while, and now is the time to release it to the webosphere (yes, I said "Web-o-sphere").
Since Solarbotics Ltd. took over HVW Technologies, we simply couldn't ignore some of the benefits of microcontrollers. Really, they're not that scary. Many of them even look like our good friend the 74AC240 IC.
We're starting our blending of technologies with the PICAXE line of microcontrollers. These have some specific features that make them very usable with BEAM projects:
- They're inexpensive. Most of us BEAMers are a cheap lot, scavenging for parts.
- They're SIMPLE. Plug in a USB cable, draw flow-charts, and download the code!
- They offer suitability. With over 13 types from very simple and small (08 series) to the powerful 40X1 series, you can pick the right tool for the job, without overkill. How BEAM-ish.
So if you've become too comfortable with your latest techniques, try something new. Stretch your brain, and check out the PICAXE. We've even got starter packs, and a book!
Besides the PICAXE, we're also dabbling with the Freeduino SB. This is a project spawned from the Arduino project out of Italy. It's an open-source hardware and software project using the Atmel ATmega168 microcontroller.The really cool thing is that that it's open-source, there's a huge world-wide community of developers and users, so there's lots of help, source-code, and examples to start with.
It's more expensive than the PICAXE, but it's a different beast. Where the PICAXE is generally just the chip, Freeduino is a full system. Besides the microcontroller, the Freeduino includes:
- USB interface (so you just plug it into your PC to use it. That's it!)
- Programming software usable on Windows, Mac, and Linux,
- Programming language that is C-like, but simpler
- Built-in voltage regulation, indicator LEDs and a FUSE. How beginner-friendly is that? (Very!)
So if you're more programming savvy than flowcharts and BASIC, check out a Freeduino SB, and do some web-searches. It's an very useable, handy platform!
MORE POSTS
New Kits: The Spazovore and the SunSwing...
Yup, we've got a few new kits ready, the Spazovore beginner's kit, and the SunSwinger Pendulum kit. We're pretty happy with both of these kits, so scroll down a bit, and read about them below!
PIMP YO' SUMO!
The biggest complaint we've ever had is that the Sumovore is boring. I mean, yeah, it can beat the tar out of most other sumos in the ring without batting an eye. But it's just so boring to watch. It'd be funner to watch the paint dry on a pot of boiling water. So, after […]
Heated Car Seat Teardown and Repair
Here's a little makeover of an inexpensive aftermarket heated car seat heating pad that stopped working. Designed to activate and warm up when sat upon, the electronics face a fair amount of abuse: since the seat is a soft frame, the wires inside constantly move and flex with the body. They are also subject to […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.