» Search » servo
This 20k 20-turn trimming potentiometer has the adjustment screw is on the narrow side, opposite the three inline leads.
The 28-pin project board is fully-assembled development board which has been designed to allow rapid prototyping with the 28-pin PICAXE microcontrollers.
This quadrature encoder board is designed to hold two infrared reflectance sensors inside the hub of a Pololu 42x19mm wheel and measure the movement of the twelve teeth along the wheel's rim.
Need a motor driver that can run at the lower voltages? The Didel 2 Motor Minishield can come to your rescue! Use your Arduino Uno (or form factor compatible) board with it to drive a tiny robot around.
The DE-SWADJ 3 is a larger version of the DE-SWADJ adjustable step down voltage regulator, and is designed to be stronger, faster and better.
A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors).
The Super Carrier Board is great for both the BASIC Stamp 1 and BASIC Stamp 2 Modules.
Use your BoE-Bot so much that you've lost many of the parts? Parallax has seen that happen enough times that they've created a bundle to bring your BoE-Bot back to 100%!
The Sabertooth 2X12 is one of the most versatile, efficient and easy to use dual motor drivers on the market.
PICAXE-14M2 replaces the 14M, and offers the impressive suite of features of the M2 series in a small SMT package.
PICAXE-08M2 microcontroller chip. Supports 6 input/outputs including 3 analog inputs.
Nanode is an open source Arduino-like board that has in-built web connectivity. It is a low cost platform for creative development of web connected ideas.
Need servo wires to attach to your sensors? We've got the 3-conductor cable with female header ready to go!
The Propeller Servo Controller allows you to control up to 16 servos (32 using two Propeller Servo Controllers) by sending serial commands from a microcontroller or PC via its USB connection.
The Adafruit Motor/Stepper/Servo Shield gives you excellent flexibility in ways to create motion with your Freeduino SB or Arduino microcontroller!
This is a LONG servo-style cable, measuring 1.72M (that's 5'8", or 68"), with thicker-than-usual wire for lower line losses.
The FP-S148 Servo is a well-known, reliable workhorse servo that is easily modified for continuous rotation.
This high performance servo from GWS comes in an impressively small package, complete with accessory pack, Futaba connectors, and a ball-bearing supported output shaft.
The DragonTail Deluxe Kit is a sturdy 3-wheel robotic platform that includes a pair of bump-sensing Dragon whiskers.
The DragonTail is a sturdy 3-wheel robotic platform that can patrol all types of surfaces. Interface your microcontroller of choice to it, program, and watch this chassis cruise.
The PhidgetMotorControl LV is a USB based controller that can control two low-voltage brushed DC motors independently for direction, velocity and acceleration.
This robotic claw arm is great for all your gripping needs. They are made from metal and are pretty heavy-duty.
This is SparkFun's version of the OpenServo open-source servo controller board. It's meant to replace the existing controller board in any standard servo (~.78 inch servo width).
This spacer allows you to use the codewheel sticker on a variety of wheels (from Budget Robotics or other vendors) or any mechanism that attaches to a servo with a servo control horn.
The PhidgetAdvancedServo 8-Motor allows you to control the position, velocity, and acceleration of up to 8 RC servo motors.
PicoSwitch is a relay switch that you toggle via hobby radio control gear.
Three pin JST connector with red, black, and yellow colored wire. 5 inches of wire length, perfect for interfacing SHARP analog Infrared sensors to your project.
Parallax's SX28 Proto Board provides a low-cost, high quality, solution for using the surface mount SX28 easily.
Parallax's SX48 Proto Board provides a low-cost, high quality, solution for using the surface mount SX48 easily. Way better than duct tape.
This essential title in McGraw-Hill's ROBOT DNA SERIES is just what robotics hobbyists need to build an effective drive train and gain a full understanding of robot locomotion.
The Prop-1 controller is a cost-effective, efficient controller specifically designed by professionals for use as a special-effect controller.† Solarbotics is the only supplier for these within Canada!
This item contains all the parts for the What's a Microcontroller text/kit.
When the WheelWatcher servo encoder is added to a standard-size RC servo, it accurately senses direction, distance, velocity and acceleration.
The What's a Microcontroller? Kit is complete beginners curriculum to microcontrollers and the BASIC Stamp.
The Parallax Propeller Backpack is a compact, multipurpose Propeller-based module that is optimized for audio and video applications.
The HB-25 Motor Controller in a fast and inexpensive way to control a DC motor up to 25 Amps.
Start building electronics projects with Netduino, the popular open source hardware platform thatís captured the imagination of makers and hobbyists worldwide. This easy-to-follow book provides the guidance you'll need to experiment with the Netduino line of devices and the .NET Micro Framework.
The Parallax Propeller Proto Board USB is much like the less-expensive 21391 Protoboard, but offers the flexibility of USB programming and USB utilization after programming!
This Project board has a surface-mount BS1, power jack, DB-9 serial connection and voltage regulator. AND it comes with a breadboard, and a selection of jumper wires.
The Parallax Propeller Proto Board is a pretty cool way to start experimenting with the Propeller IC. As usual, we're about the coolest place in the world to this cool item!
This tiny module can control two motors, 1 A peak each, and you can daisy-chain multiple units to control up to 62 motors with a single serial line.
The PWMPAL provides up to 4 channels of PWM control to any microcontroller.
The Prop-2 controller is a cost-effective, efficient controller specifically designed by professionals for use as a special-effect controller. Solarbotics is the sole retailer for these within Canada!
Running motors with PIC microcontrollers is a hands on tutorial on running all sorts of small motors with PICBasic and PIC Microcontrollers.
The Propeller Professional Development Board (PPDB) is a high-quality, fully-integrated development platform for the Propeller microcontroller.
Surface mount PICAXE? You bet! All the power of the PICAXE-18X in a tiny 300mil SOIC.
The LAB-XUSB Experimenter Board is a premium development platform for PICmicros, with LCD and keypad built-in.
The PICAXE-40X2 IC is the biggest, baddest PICAXE made - even better than the 40X1!
The Professional Development Board is the ultimate BASIC Stamp experimenter board.
This is the low voltage version of the new PICAXE-28X2.
Forgot Your Password?
Don't Have an Account?Sign Up!