ScoutWalker III Workshop

Dave Hrynkiw
April 29, 2005

Space is Limited! RSVP as soon as possible! -- Solarbotics will be hosting another workshop to get you prepared for this
year's annual Western Canadian Robot Games.
The main attraction will be our almost-in-production ScoutWalker III Robot.
The ScoutWalker III is an agile two-motor walking BEAM robot platform designed to take advantage of
microprocessor-based brainboards, much like our award-winning Sumovore!

The workshop will be taking place at Solarbotics' new HQ <map>
and we need at least 10 people to showup. Doors will open at 5:00pm on Friday, May 13, 2005 and we will be kicking
everyone out at midnight, bot finished or not. Sorry! We have to get up early to prepare for the games.
We ask that you BYOT (Bring your own tools) if you can, so that you can BYOB
(Build your own bot)

We are providing the ScoutWalker III at an introductory rate of $99, but you
don't necessarily have to build one. You may build any type of robot you wish,
and if you want to build another Solarbotics Kit, we will offer you a credit for 10%
off.

MORE POSTS

February 5, 2010
Temperature Sensors, New Instructable

Woo, we've had a busy week! To start things off, we have a new category - Temperature Sensors! So far it has the following items: Humidity/Temperature Sensor DS1620+ Serial Digital Thermometer DS18B20+ Temperature Sensor Devantech TPA81 8x1 Thermopile LilyPad Temperature Sensor Yeah, it's a pretty bare category at the moment, but we'll be adding to […]

December 13, 2013
New Product, Holiday Hours and Shipping ...

So today we have a nest. And some other things, like a programmer. If you take the programmer you can program the cleaning wire nest and the code will travel through all the little coils and come out the other end all transformed and golden too. It's almost like enlightenment. And then it will suitable […]

February 26, 2002
Vancouver BEAM Workshop

Here's a few links to a workshop spear-headed by ScottyDogma in Vancouver, B.C. Some impressive work done using servos, BIOBug motors, some wooden spacer blocks and lots of soldering! Nice job, guys. Pics and movies: http://www3.telus.net/dogmabots Full Size (1344 x 1008, 500-700K) http://www.davehylands.com/VRC-BEAM-Workshop/index.html Half-Size (672 x 504, 100-150K) http://www.davehylands.com/VRC-BEAM-Workshop/Thumb-B/index.html

September 13, 2005
SCC3733 Solarcell hacking

Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current: After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart