SCC3733 Solarcell hacking

Dave Hrynkiw
September 13, 2005

Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current:

After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate the two sides of the cell and then to cross-connect the two sides of the bus to the + and - contacts. This puts the two sides in parallel.

Nice - half the voltage; twice the current, still all in the same solar package!

MORE POSTS

November 1, 2005
New Canadian Prices

I've got a note on my desk that says "Annouce that some Canadian Prices have changed". Uh...ok. I do what I'm told. Apparently, this has something to do with our Canadian dollar climbing like a rabid beaver.

May 8, 2009
Propellor, Maker Faire

Welcome ladies and gentlemen, to a special edition Evening News Post! That's right, it's way past the magical closing time here at Solarbotics but some of us are trudging onward. To what end, you wonder? Well, if you've seen that shiny orange promo banner up top you'll know why. MAKER FAIRE! Yup, just like the […]

August 7, 2013
Wednesday Cool Links: Bagels, Algorhithm...

Well, we survived the skeleton Tuesday, now it's time for Cool Links Wednesday: Mathematically Correct Breakfast: How to Slice a Bagel into Two Linked Halves Never thought math and bagels went together so well! While I am no mathematician at any rate, the intellectual stimualtion of creating a two-twist moebius strip, you can get slightly […]

April 6, 2016
Wednesday Links: Transparent Aluminum, G...

Transparent Aluminum Well, technically not exactly aluminum, but aluminum-based ceramic called aluminum oxynitride. Still with quite magical properties. (Via Makezine) Concealed Layers of Product Life Renee Verhoeven's grad project explores the relationship between anatomy and mobility in the series of gloves, using laser cutting. (Via Mocoloco) Asian Snack Enamel Pins These lovely pins by giantrobot.com […]

1 88 89 90 91 92 253
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart