Engadget has a large (albeit short) video of the new RoboSapien V2, and a bit of the Robopet. Check it out!
Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current:
After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate the two sides of the cell and then to cross-connect the two sides of the bus to the + and - contacts. This puts the two sides in parallel.
Nice - half the voltage; twice the current, still all in the same solar package!
Engadget has a large (albeit short) video of the new RoboSapien V2, and a bit of the Robopet. Check it out!
New Order Form is up and running. There are many new improvements, streamlined shipping, quicker download time, better ordering systems and viewing. We don't anticipate any bugs, but we may still have a few, if you find one, please send it to the webmaster HERE. This is just one more way in which Solarbotics is […]
Grove - 4-Digit Display $7.25 4 digit displays are usually a 12 pin module. In this Grove gadget, we used a TM1637 to scale down the controlling pins into 2 Grove pins. Wireless USB Adapter $16.50 USB WiFi (802.11b/g/n) Module: For Raspberry Pi and more. Grove - Screw Terminal $3.50 Grove - Screw Terminal with […]
Solarbotics is helping out local fashion designers prepare their e-wearables for the Calgary MakeFashion. This time, Tony Grimes dropped in to experiment with his fiber-optic cloth from SensingTex as an illuminating surface, but the included 5mm LED was not dazzling enough. Time to hack in our 3W RGB Star Controller! The plan was to shift […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.