SCC3733 Solarcell hacking

Dave Hrynkiw
September 13, 2005

Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current:

After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate the two sides of the cell and then to cross-connect the two sides of the bus to the + and - contacts. This puts the two sides in parallel.

Nice - half the voltage; twice the current, still all in the same solar package!

MORE POSTS

August 29, 2002
GM2 Modifications

Our GM2 gearmotors are powerful, and just a bit slower than a standard servo, making them ideal for a walker. But for you folks who like wheeled robots, these are simply too slow. Solarbotics' own Grant McKee to the rescue! We barely had the motors opened 10 minutes before Grant figured out that these motors […]

October 3, 2002
Junkbots book nearing!

We just received word that the book that we had heavy involvement with is nearing distribution! Keep an eye out for "Junkbots, Bugbots, and Bots on Wheels: Building Simple Robots with BEAM Technology" (ISBN: 0072226013). It's officially supposed to be out October 8th, but word is that it's presently in the warehouse! (YES, of course […]

November 23, 2003
Absolute Beginner's Guide to Building Ro...

We've been getting requests for the parts bundles as mentioned in Gareth Branwyn's book 'Absolute Beginner's Guide to Building Robots'. We're sorry to say that we don't have them ready yet (major website development takes up staff man-hours), so please bear with us - we're working towards having something together. And no, we don't have […]

April 17, 2014
New Product and Day Off

It's a short week this week, so new product is coming early. We are closed Friday April 18th, which is hence called Good Friday. LilyPad Arduino SimpleSnap with LiPoly cell $29.95 This is the LilyPad Arduino SimpleSnap Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the LilyPad Arduino […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

cart