We now sell Sintra, a lightweight, easy to work with material that comes in a variety of colors including white, red, blue and yellow. Check the link at: Sintra Sales page Sintra is easy to cut by scoring a line with a knife and then breaking it. Glue also works well bonding pieces of sintra […]
SCC3733 Solarcell hacking
Dave Hrynkiw
September 13, 2005
Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current:
After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate the two sides of the cell and then to cross-connect the two sides of the bus to the + and - contacts. This puts the two sides in parallel.
Nice - half the voltage; twice the current, still all in the same solar package!
MORE POSTS
DIY LED Fosshape Horns
A handy tutorial explaining how to put together the RGB LED Horns. Make your own, or get a kit with everything included (except for the paint). Supplies: Fosshape 300 2 x slow scroll RGB LED 2 x coin cell batteries conductive thread 2 x coin cell battery holder - sewable 2 x pieces of velcro […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.