There is no excerpt because this is a protected post.
Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current:
After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate the two sides of the cell and then to cross-connect the two sides of the bus to the + and - contacts. This puts the two sides in parallel.
Nice - half the voltage; twice the current, still all in the same solar package!
There is no excerpt because this is a protected post.
Hey!?! Didja know we didn't have a link to the BS2 code for the Sumovore BS2 add-on board? Well, we did, but it was on the news posting, not the BS2 adapter board page (it does now!). Grant did a great job setting up framework for a great dual-purpose BS2-controlled Sumovore. Set it down on […]
Yes, it's true. After years of working our fingers to the bone inserting jumper wires on breadboards to make unusually robust controllers for robots out of discrete & logic chip elements, Solarbotics has seen the light! We've put on our eye-patch, hoisted the jolly-roger, and swung along-side to board the HMS HVWTech.com ! That's right […]
Well, we have some good news and some bad news. First, the good. We've been keeping incredibly busy working on bringing in some new products. The bad news... We've been incredibly busy. So busy on new products (and a few big projects), in fact, that we don't really have anything ready to show you (yet). […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.