SCC3733 Solarcell hacking

Dave Hrynkiw
September 13, 2005

Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current:

After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate the two sides of the cell and then to cross-connect the two sides of the bus to the + and - contacts. This puts the two sides in parallel.

Nice - half the voltage; twice the current, still all in the same solar package!

MORE POSTS

April 12, 2009
"Most Adorable Robot Experiment Ever"

Cute project in NYC with a friendly little cardboard robot that interacts with the "gruff" population of NYC ...And if you look closely, there's something about the wheels that look familiar!

April 11, 2014
Friday New Product: LilyTwinkle, Teensy ...

It's Friday again, and it's been a busy (two) weeks since there was a new product. Wait no more, here it is. 4-Conductor LED Strip Clamp $0.95 Reduce the crazy soldering mess with these super useful RGB LED strip clamps! LilyTwinkle ATtiny85 $6.95 A preprogrammed controller board that can make your wearable project sparkle and […]

March 23, 2012
Ardweeny Non-Clock, New (Mainly Battery)...

It's that time of the week where we point to a pile of new things and exclaim "LOOKIT THAT!", before bouncing away on pogo sticks. We're kidding, of course. If we actually did that it'd be plain ol' absurd. First things first - a neat-o community project needs to come before that sweet, sweet pogo […]

December 9, 2015
Wednesday Links: Tattoos, Laser Cutting ...

Temporary Tattoos to Monitor Vitals An lighter more wearable alternative to FitBit (Via Beautiful Decay) Laser-Cut Wood Illustrations Layering laser-cut wood taken to a whole new level, by Martin Tomsky (Via Colossal) Tiny V8 Engine Out of Paper Paper can be exceptionally sturdy, especially when strengthened by glue. By Aliaksei Zholner (Via Gizmodo) REM Detection […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.