I created this choker as a project to demonstrate the new MicroNova APA102-2020 LED strips. Photo by Yeti, edited by Batgirl These addressable LEDs are extremely small, less than 1/4 the size of a standard 5050 LED. This project was built using engineering sample standard MicroNova 99 LED / meter strips . The MicroNova strips we are selling have 198/meter - […]
SCC3733 Solarcell hacking
Dave Hrynkiw
September 13, 2005
Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current:
After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate the two sides of the cell and then to cross-connect the two sides of the bus to the + and - contacts. This puts the two sides in parallel.
Nice - half the voltage; twice the current, still all in the same solar package!
MORE POSTS
New Solarcell, the SCC3766
Ah, another new solar cell! See? There is a solar aspect to Solarbotics! Come check out the SCC3766 - it's a powerhouse!
GM10 Dimensions
Thanks to Bill Bigge, we've got a PDF dimension drawing of our GM10 gearmotor available for download. Thanks go out to Bill and his ruler! Read More...
Sumovore Line-follower
This link is a bit on the old side, but if you are thinking of entering the WCRG event next month, here's last year's champion's (Craig Limber) webpage about turning his Sumovore into an almost-as-good line follower! It's a good way to get into this rapidly-growing event...
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.