There is no excerpt because this is a protected post.
SCC3733 Solarcell hacking
Dave Hrynkiw
September 13, 2005
Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current:
After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate the two sides of the cell and then to cross-connect the two sides of the bus to the + and - contacts. This puts the two sides in parallel.
Nice - half the voltage; twice the current, still all in the same solar package!
MORE POSTS
Friday New Product: Grove, Charger, Stro...
We are going to continue with some nice Grove products and mix it up with other bits and pieces. More sensors, a SparkFun LiPo charger, and some raw parts round out this session.
New TINY Pogo Pin Probes
We had some requests for some really, really small Pogo Push Pin Probes (Hmmm...shoulda named them PPPPs...). Anyway, here's the PP8s and the PPH2, which are the "short" version of the PP8 and the necessary holder to mount them. If you have really tight spaces you need to test, these are the probes you'll need!
BIOBugs Update
News from Mr. Tilden: The official unveiling of Hasbro/Wowwee BIOBugs will be September 14, with a huge unleasing of 100 of these critters into the desert of White Sands, New Mexico. Additionally, Mark himself is slated to be on the Rosie O'Donnell Show sometimes on the week of September 17. This will coincide with the […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.