SCC3733 Solarcell hacking

Dave Hrynkiw
September 13, 2005

Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current:

After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate the two sides of the cell and then to cross-connect the two sides of the bus to the + and - contacts. This puts the two sides in parallel.

Nice - half the voltage; twice the current, still all in the same solar package!

MORE POSTS

September 13, 2005
Sumovore Atmel Brainboard code upgrade

The Atmel Brainboard is a very popular add-on to our Sumovore Sumo robot. But with newer releases of the WinAVR GCC programming suite, there is a difference in the way the source code is handled that will make it not compile and load properly. Bob Cook has been nice enough to tweak our source to […]

January 25, 2018
Rick and Morty Portal Gun

Every year a group of my friends have an engineering Secret Santa. The rules are simple: make something cool for under $20 that requires engineering to complete. In years past we’ve seen Google cardboard VR headsets that are 6DOF, match stick rockets, 3D printed fans that explode when used, 3D printed rockets with cardboard launch […]

July 12, 2007
BEP Application: Servocore Walker

BEP02-Complete-120_2035.jpg
The following instructions detail how to build a Servocore walker. A Servocore walker differs from a regular walker by utilizing the internal electronics in unmodified servos, which give position feedback from the motor in the servo. This position feedback allows for very long stride lengths without the use of mechanical stops or springs.

April 24, 2019
We will be at the Calgary Comic Expo!

The Calgary Comic Expo starts this week! If you have not bought your tickets yet, you can do so by clicking here.   Keep updated on our Facebook and Instagram for live streams and media coverage of the event! Our booth is #1113.

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.