Our phones are currently down for maintenance. We apologize for inconvenience, the phone service will resume shortly.
Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current:
After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate the two sides of the cell and then to cross-connect the two sides of the bus to the + and - contacts. This puts the two sides in parallel.
Nice - half the voltage; twice the current, still all in the same solar package!
Our phones are currently down for maintenance. We apologize for inconvenience, the phone service will resume shortly.
Every year a group of my friends have an engineering Secret Santa. The rules are simple: make something cool for under $20 that requires engineering to complete. In years past we’ve seen Google cardboard VR headsets that are 6DOF, match stick rockets, 3D printed fans that explode when used, 3D printed rockets with cardboard launch […]
These new Baby "Helios" Turbots by Grant McKee are an experiment to see how much can be done Turbot-wise with a single motor.
PayPal payments are working again, thank you for your patience. We're currently aware of an issue regarding PayPal and are working to correct the problem. If you have attempted to place an order via PayPal, nothing has been preauthorized or charged to your account. If you need to place an order, please email sales via […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.