SCC3733 Solarcell hacking

Dave Hrynkiw
September 13, 2005

Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current:

After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate the two sides of the cell and then to cross-connect the two sides of the bus to the + and - contacts. This puts the two sides in parallel.

Nice - half the voltage; twice the current, still all in the same solar package!

MORE POSTS

February 16, 2016
OpenBeam & Nightmares in China Sour...

We've been a big fan of Openbeam for a long time, and when Terence Tam started producing 3D printers using this material, we were hopeful that this would be a great fit for his operation. Nice material, great engineering - what could go wrong? LOTS. Follow his spiral down the Asian rabbit-hole when his selected […]

December 3, 2001
BIOBug / BEP Contest

Think you're good at modifying toys? Got a toaster with legs? A cat with wheels? A self-pruning Chia-Pet? Well, do we have a contest for YOU: Mark Tilden has confirmed with us that he's willing to donate two complete sets of Wowwee/Hasbro BIOBugs (4, one of each type) to the top two hacks/modifications to be […]

November 10, 2014
Project Monday: The Story of SharkBot

Not every product we design is destined to make it to the consumer. Sometimes a great idea gets taken to completion before we realize that one factor or another dooms it to an existence in our failed project bin. One such project that now lives a watery grave is the Sharkbot. Akin to our much […]

November 17, 2009
SparkFun hates robots.

We love SparkFun. Great group of people. Excellent products. It's just that they're... well... twisted and cruel. You see their RoboJoust event? We didn't take them serious when they said it was to be performed 4' off a concrete floor. But here's the proof. They're actually building the table that high off the ground. Next […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart