SCC3733 Solarcell hacking

Dave Hrynkiw
September 13, 2005

Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current:

After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate the two sides of the cell and then to cross-connect the two sides of the bus to the + and - contacts. This puts the two sides in parallel.

Nice - half the voltage; twice the current, still all in the same solar package!

MORE POSTS

May 3, 2013
Friday New Product: Motor Brackets, Mini...

And again, after a little bit of a (long) break, we're back with the new exciting things. This time we brought in some tiny motor brackets, a Minishield from Didel and a uM-FPU64 Breakout Board Kit. GM23 Motor Brackets & 18mm Wheels $13.52 The microbot revolution has arrived! These brackets and 32mm wheels are much […]

December 16, 2011
Shipping Dates & Pre-Holiday Megapo...

Ok, we won't lie - we have a lot of content to show you today, so we're going to jump right in, starting with... Shipping Cutoff Dates It's getting down to the wire if you want to get a few last-minute gifts for Christmas. Here are our cutoff dates for submitting an order and still […]

June 8, 2012
New Product Friday: Raspberry SAFE, IR S...

Friday! New stuff! Go! Solarbotics Raspberry SAFE $8.95 Now that you've waited a long, long while for your Raspberry Pi® board to arrive you'll want to protect your precious! Use the Raspberry SAFE to protect it from the harmful environment that is your desk. I2C-It Sharp IR Distance Sensor (10 to 80cm range) $16.45 We've […]

August 8, 2017
Project: LED Earrings

The idea of adorning oneself with glowing bits has been around forever, but instead of smearing ourselves with phosphorescent jellyfish or placing fireflies in ears like some uncivilized cavemen we went for simple LED earrings. We made a build that involves a simple slow-scroll RGB LED and a few reflective bits to bounce that pretty […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart