Time for a big product update! Again, we're thrilled with the Grove line of microcontroller-interconnected thingies, so heres a few more Grove-compatibles, SD cards, and a lonesome piezo speaker:
Jeremie, our engineer and the brains behind the SB-FireFly, can't seem to put the thing down even though it's all done and released. He's been hard at work figuring out what it's capable of, and figures that the hardware and framework could be used for a Micro-TV-B-Gone broadcaster, IR code repeater, and even a tiny robot controller. This week, Jeremie turned the SB-FireFly into a countdown timer and even a 'Twinkle Grenade'. Check out the hack descriptions below for more information.
SB-FireFly Countdown Timer
The inspiration for this hack comes from a certain Solarbotics Head-Geek burning up too many Freeduinos in the re-flow oven... I mean, we had trouble cooking hardboiled eggs... yeah… that's it. A permanent 3 minute timer was needed to save the innocent PCBs... er... eggs.
Additional Hardware required: Needs a Piezo Buzzer soldered to the expansion port from S (PB3) to G (GND).
Code: Download here
What it does:
Turns an LED on then beeps at the 1 minute mark
Turns 2 LEDs on and beeps at the 2 minute mark
Turns 3 LEDs on then continuously beeps & flashes all LEDs at the 3 minute mark until the button is pressed.
Meanwhile, during the countdown mode if the button is pressed it will restart the countdown from the beginning. During the continuously flashing/beeping behaviour the button will put the SB-FireFly to sleep, and if pressed again it’ll restart the countdown.
Application: It can be modified to be a timer of any sort, reminding you at certain intervals to take action such as pulling PCBs out of the oven eggs out of the pot.
SB-FireFly Twinkle Grenade
The inspiration for this hack comes from either the desire for mischief or the need for chip tunes. One of the two. Okay, maybe both.
Additional Hardware required: Needs a Piezo Buzzer soldered to the expansion port from S (PB3) to G (GND)
Code: Download here
What it does: Continuously plays Twinkle Twinkle Little Star and flashes all the LEDs in time with the notes until the button gets pressed. Upon button press, the SB-FireFly goes to sleep (because, unfortunately, no amount of Twinkle Twinkle Little Star makes electronics fall asleep). Push the button again and the tune will start back up where it left off.
Application: Annoying your friends, family, and co-workers. Throw it in a colleague’s office and run away as they frantically search the floor trying to turn it off (we swear we haven't done this at all…). Or you could be sneaky and hide it in a vent or inside a drop ceiling. Magnets stick quite well to the back of the SB-FireFly, so it can then be temporarily attached to a metal surface quite easily.
With the sheer plethora of possibilities for the SB-FireFly (or 'hacklications', as Jeremie likes to call them), there'll probably be another one or two similar posts on the horizon for how to tweak this mini blinky platform extraordinaire, so stay tuned!
Time for a big product update! Again, we're thrilled with the Grove line of microcontroller-interconnected thingies, so heres a few more Grove-compatibles, SD cards, and a lonesome piezo speaker:
In my recent wanderings in the world of overly-cheerful financial advise, I stumbled upon this budgeting theory that says that to feel comfortable about your moneys, or lack thereof, you gotta be living on your last month's earnings. Let's leave out the question of how anyone would pull it off, and just say that I […]
No more rubber band tires for us! We've invested in getting our very own wheels made for us, with molded-on thermoplastic rubber wheels! These wheels are slightly larger in diameter than the old style, measuring 69.2mm (2.72") diameter and 7.65mm (0.30") wide. Ah, but how good are they? They're definitely better than the old style! […]
Every year a group of my friends have an engineering Secret Santa. The rules are simple: make something cool for under $20 that requires engineering to complete. In years past we’ve seen Google cardboard VR headsets that are 6DOF, match stick rockets, 3D printed fans that explode when used, 3D printed rockets with cardboard launch […]
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.